Label Printers

Micra II - affordable label printer

/fileadmin/user_upload/Produkttitelbilder/carl_valentin_etikettendrucker_micra2_titelbild_2023-06-28.jpg

Appealing design and compact overall size

The Micra II series prints alternatively in thermal direct or thermal transfer mode. The pleasing design inserts itself into different environments. owing to the amply measured cover label roll and ribbon can be changed simply and fast.


Large label capacities and large transfer ribbon capacities


Despite the small size of housing the printer can be equipped with label rolls up to 127 mm (5“) and ribbons with 300 m length. Idle times caused by replacing the expandable material will be reduced and productivity will be increased.

  • Low-cost starter model for smaller printing volumes
  • Print width up to 105.7 mm
  • Thermal direct or thermal transfer print
  • Serial and USB port
  • Ethernet interface
configtool
Ermöglicht Konfigurationen mit professionellem Tool "configTool"
labelstar
nicelabel

Videos

Technical data

Printing
Print resolution

203 dpi

Printing
Print speed

max 130 mm/s

Printing
Print width

104 mm

Printing
Passage width

118 mm

Labels
Label width

min 25 mm

Labels
Label height

standard: min 12 mm


dispenser mode/cutter mode: min 25 mm

Labels
Label height

max 1727 mm

Printing
Printhead

Flat Type

Labels
Adhesive labels, continuous labels

paper, cardboard, textile, synthetics

Labels
Material weight

min. 0,06 mm
max. 0,25 mm

Labels
Roll diameter

max 127 mm

Labels
Core diameter

25.4 mm, 38.1 mm, 76.2 mm

Labels
Winding

outside or inside

Labels
Label sensor

transmission and reflexion from below

Transfer ribbon
Ink

outside

Transfer ribbon
Roll diameter

max Ø 68 mm

Transfer ribbon
Core diameter

25.4 mm / 1"

Transfer ribbon
Length

max 300 m

Transfer ribbon
Width

max 110 mm

Dimensions
Width x height x depth

285 x 171 x 226 mm

Dimensions
Weight

2,72 kg

Electronics
Processor

32 Bit RISC

Electronics
SDRAM

16 MB

Electronics
Warning signal

acoustic signal when error

Interfaces
Serial

RS-232C (up to 115200 baud)

Interfaces
USB

2.0 High Speed Slave

Interfaces
Ethernet

10/100 Base T, LPD, RawIP-Printing, DHCP

Operation data
Power supply

Portable power supply: 100 … 240 V AC / 50-60 Hz
Label printer: 24 V DC

Operation data
Nominal current

2.5 A

Operation data
Power consumption

max 70 VA

Operation data
Operating temperature

5 … 40 °C

Operation data
Relative humidity

max 80 % (non-condensing)

Monitoring
Stop printing if ...

end of ribbon, end of labels, printhead open

Monitoring
Status report

extensive status print with information about settings, e.g. print lenght counter, runtime counter, photocell, interface parameters


printout of all internal fonts and all supported bar codes

Fonts
Font types

6 bitmap fonts


6 proportional fonts


other fonts on request

Fonts
Character sets

Windows 1250 up to 1257, 437, 850, 852, 857


all West and East European, Latin, Cyrillic, Greek and Arabic characters are supported


other character sets on request

Fonts
Bitmap fonts

size in width and height 0.8 … 5.6


zoom 2 … 9


orientation 0°, 90°, 180°, 270°

Fonts
Font attributes

depending on character font:
bold, italic, inverse, vertical

Fonts
Font width

varible

Bar codes
1D bar codes

CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E

Bar codes
2D bar codes

Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417, QR Code

Software
Configuration
Software
Process control
Software
Label software
Software
Windows driver
Printing
Print resolution

300 dpi

Printing
Print speed

max 100 mm/s

Printing
Print width

105,7 mm

Printing
Passage width

118 mm

Printing
Label width

min 25 mm

Labels
Label width

min 25 mm

Printing
Label height

standard: min 12 mm


dispenser mode/cutter mode: min 25 mm

Labels
Label height

standard: min 12 mm


dispenser mode/cutter mode: min 25 mm

Labels
Label height

max 762 mm

Printing
Printhead

Flat Type

Labels
Adhesive labels, continuous labels

paper, cardboard, textile, synthetics

Labels
Material weight

min. 0,06 mm
max. 0,25 mm

Labels
Roll diameter

max 127 mm

Labels
Core diameter

25.4 mm, 38.1 mm, 76.2 mm

Labels
Winding

outside or inside

Labels
Label sensor

transmission and reflexion from below

Transfer ribbon
Ink

outside

Transfer ribbon
Roll diameter

max Ø 68 mm

Transfer ribbon
Core diameter

25.4 mm / 1"

Transfer ribbon
Length

max 300 m

Transfer ribbon
Width

max 110 mm

Dimensions
Width x height x depth

285 x 171 x 226 mm

Dimensions
Weight

2,72 kg

Electronics
Processor

32 Bit RISC

Electronics
SDRAM

16 MB

Electronics
Warning signal

acoustic signal when error

Interfaces
Serial

RS-232C (up to 115200 baud)

Interfaces
USB

2.0 High Speed Slave

Interfaces
Ethernet

10/100 Base T, LPD, RawIP-Printing, DHCP

Operation data
Power supply

Portable power supply: 100 … 240 V AC / 50-60 Hz
Label printer: 24 V DC

Operation data
Nominal current

2.5 A

Operation data
Power consumption

max 70 VA

Operation data
Operating temperature

5 … 40 °C

Operation data
Relative humidity

max 80 % (non-condensing)

Monitoring
Stop printing if ...

end of ribbon, end of labels, printhead open

Monitoring
Status report

extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters


printout of all internal fonts and all supported bar codes

Fonts
Font types

6 bitmap fonts


6 proportional fonts


other fonts on request

Fonts
Character sets

Windows 1250 up to 1257, 437, 850, 852, 857


all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported


other character sets on request

Fonts
Bitmap fonts

size in width and heigth 0.8 … 5.6


zoom 2 … 9


orientation 0°, 90°, 180°, 270°

Fonts
Font attributes

depending on character font:
bold, italic, inverse, vertical

Fonts
Font width

variable

Bar codes
1D bar codes

CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E

Bar codes
2D bar codes

Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417, QR Code

Software
Configuration
Software
Process control
Software
Label software
Software
Windows driver
Subject to alterations

Program Variants

System requirements

Accessories

9266

Valentin cleaning set

Cleaning set
9645005

The Valentin cleaning set is optimally suited for maintaining and cleaning the printheads of Valentin printers yourself.

It contains:

  • Compressed gas for dust removal
  • Label remover
  • Cleaning wipes
  • Printhead and roller cleaner
  • Cleaning film
  • Spatula
  • Cotton swabs

A video on printhead cleaning can be found under Printers or in our YouTube Playlist Printhead Cleaning.
 

9640

Cutter unit "Guillotine"

Cutter units
9018862A

The guillotine cutter permits cutting of labels up to 170 g/m².

Single cut, interval cut and final cut can be selected.

3088

Cutter unit "Guillotine"

Cutter units
9018865

The guillotine cutter permits cutting of labels up to 170 g/m².

Single cut, interval cut and final cut can be selected.

3087

Cutter unit "Rotation"

Cutter units
9018860

The rotary cutter permits cutting of labels up to 200 g/m².

Single cut, interval cut and final cut can be selected.

3089

Cutter unit "guillotine" with antistatic brush

Cutter units
9018867

The guillotine cutter with antistatic brush permits cutting of labels up to 170 g/m².
Single cut, interval cut and final cut can be selected.
The antistatic brush prevents the electrostatic charge on the material.

9652

Dispenser unit with photocell

Dispenser units
9018850

The photocell recognizes the label in the dispensing position and interrupts the print order. After removing the label by hand the next label is printed immediately.

3091

External label unwinder

External label unwinder
9218001

For unwinding large label rolls

Max external diameter of label roll: 250 mm

Label winding: outside/inside

1519

Label rewinder PR 12

Rewinder units
9252120

PR 12 for rewinding the labels after printing

Max outside diameter of label roll: 300 mm

Max label width: 120 mm (for Compa II 10X, Spectra 10X)

Label winding: outside/inside

Core diameter:
40 mm on cardboard core or winding axis/
76 mm on cardboard core using adapter (included)

The rewinder has its own power supply.

CARL VALENTIN GMBH ·
Neckarstraße 78 - 86 u. 94 ·
78056 Villingen-Schwenningen

Tel. +49 7720 9712-0 ·
Distribution centre +49 7720 9712-20 ·
Fax +49 7720 9712-9901 ·
info@domain1.tld