Our Products

Spectra II


  • 6.5" Touch-screen display

  • Roll-to-Roll

  • Print speed up to 350 mm/s

  • Skip gap

optimisation
scanner
thermal printhead
configtool
Ermöglicht Konfigurationen mit professionellem Tool "configTool"
labelstar
nicelabel

Spectra II – High-speed performance in the 2nd generation

Our developers have once again done a great job: with the further development of the Spectra into the SPECTRA II, one of the quickest and most precise label printers has been optimised even further.



The first thing you see is the modern design line in which the 6.5" touch display, included as standard, is a striking new feature. It allows for intuitive manual operation: quick, direct and uncomplicated. The printing process is quick as well: with speeds of up to 350 mm/s and additional transfer tape optimisation, there are hardly any comparable label printers which can hold a candle to the Spectra II here. This innovation from Carl Valentin is thus the perfect solution for all industries in which quick, precise and high-quality printing results matter.


A wide variety of optional features such as skip gap (for maximum utilisation of transfer ribbon), roll-to-roll (rolls up to max 200 mm can be unwinded and rewinded internally), barcode scanner or WLAN round out the overall impression: equipped for practically any industrial infrastructure!

Printing
Print resolution
200 dpi
Printing
Print speed
max 350 mm/s
Printing
Print width
104 mm
Printing
Passage width
116 mm
Printing
Label width
min 15 mm
Printing
Label height
max 6000 mm
Printing
Label height
standard: min 6 mm
dispenser mode/cutter mode: min 25 mm
Printing
Printhead
Flat Type for thermal direct
Labels
Adhesive labels, continuous labels
paper, cardboard, textile, synthetics
Labels
Material weight
max 220 g/m² (other weight on request)
Labels
Roll diameter
internal unwinder: max 200 mm
internal rewinder: max 200 mm (option)
Labels
Core diameter
40 mm
75 mm (option)
Labels
Winding
outside or inside
Labels
Label sensor
standard: transmission and reflexion from below
option: transmission and reflexion from above, ultrasonic photocell
Transfer ribbon
Ink
outside or inside
Transfer ribbon
Roll diameter
max Ø 90 mm
Transfer ribbon
Core diameter
25.4 mm / 1"
Transfer ribbon
Length
max 600 m
Transfer ribbon
Width
max 110 mm
Dimensions
Width x height x depth
287 x 380 x 503 mm
Dimensions
Weight
19 kg
Electronics
Processor
High Speed 32 Bit
Electronics
RAM
16 MB
Electronics
Slot
for Compact Flash Card type I
Electronics
Battery cache
for real-time clock (data storage when shutdown)
Electronics
Warning signal
acoustic signal when error
Interfaces
Serial
RS-232C (up to 115200 baud)
Interfaces
Parallel
Centronics (SPP)
Interfaces
USB
2.0 High Speed Slave
Interfaces
Ethernet
10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP
Interfaces
2 x USB Master
connection for external USB keyboard and memory stick
Interfaces
WLAN
module 802.11 b/g/n WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, EAP (option)
Operation data
Power supply
110 … 230 V
Operation data
Power consumption
300 VA
Operation data
Nominal current
2.5 A
Operation data
Operating temperature
5 … 35 °C
Operation data
Relative humidity
max 80 % (non-condensing)
Operation panel
Keys
home, function menu, memory card, print start, test print, label feed
Operation panel
Touch-screen display
800 x 480 pixel with background lighting
screen size 6.5"
Settings
Default settings
date, time, shift times
11 language settings (other languages on request)
device parameters, network, remote console, interfaces, emulation, password protection
Monitoring
Stop printing if
end of ribbon, end of labels
Monitoring
Status report
extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters, network parameters
printout of all internal fonts and all supported bar codes
Fonts
Font types
6 bitmap fonts
8 vector fonts/TrueType fonts
6 proportional fonts
other fonts on request
Fonts
Character sets
Windows 1250 up to 1257, DOS 437, 850, 852, 857, UTF-8
all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported
other character sets on request
Fonts
Bitmap fonts
size in width and height 0.8 … 5.6
zoom 2 … 9
orientation 0°, 90°, 180°, 270°
Fonts
Vector fonts/ TrueType fonts
size in width and height 1 … 99 mm
variable zoom
orientation 0°, 90°, 180°, 270°
Fonts
Font attributes
depending on character font
bold, italic, inverse, vertical
Fonts
Font width
variable
Bar codes
1D bar codes
CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E
Bar codes
2D bar codes
Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417, QR Code
Bar codes
Composite bar codes
GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated
Bar codes
all bar codes are variable in height, module width and ratio
orientation 0°, 90°, 180°, 270°
optionally with check digit and human readable line
Software
Configuration
ConfigTool
Software
Process control
NiceLabel
Software
Label software
Labelstar Office | LITE
Labelstar Office
Software
Windows driver
Windows 7® 32/64 Bit
Windows 8® 32/64 Bit
Windows 8.1® 32/64 Bit
Windows 10® 32/64 Bit
Windows Server 2008® (R2) 64 Bit
Windows Server 2012® 64 Bit
Windows Server 2012® (R2) 64 Bit
Printing
Print resolution
200 dpi
Printing
Print speed
max 350 mm/s
Printing
Print width
104 mm
Printing
Passage width
116 mm
Printing
Label width
min 15 mm
Printing
Label height
max 6000 mm
Printing
Label height
standard: min 6 mm
dispenser mode/cutter mode: min 25 mm
Printing
Printhead
Flat Type for thermal transfer
Labels
Adhesive labels, continuous labels
paper, cardboard, textile, synthetics
Labels
Material weight
max 220 g/m² (other weight on request)
Labels
Roll diameter
internal unwinder: max 200 mm
internal rewinder: max 200 mm (option)
Labels
Core diameter
40 mm
75 mm (option)
Labels
Winding
outside or inside
Labels
Label sensor
standard: transmission and reflexion from below
option: transmission and reflexion from above, ultrasonic photocell
Transfer ribbon
Ink
outside or inside
Transfer ribbon
Roll diameter
max Ø 90 mm
Transfer ribbon
Core diameter
25.4 mm / 1"
Transfer ribbon
Length
max 600 m
Transfer ribbon
Width
max 110 mm
Dimensions
Width x height x depth
287 x 380 x 503 mm
Dimensions
Weight
19 kg
Electronics
Processor
High Speed 32 Bit
Electronics
RAM
16 MB
Electronics
Slot
for Compact Flash Card type I
Electronics
Battery cache
for real-time clock (data storage when shutdown)
Electronics
Warning signal
acoustic signal when error
Interfaces
Serial
RS-232C (up to 115200 baud)
Interfaces
Parallel
Centronics (SPP)
Interfaces
USB
2.0 High Speed Slave
Interfaces
Ethernet
10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP
Interfaces
2 x USB Master
connection for external USB keyboard and memory stick
Interfaces
WLAN
module 802.11 b/g/n WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, EAP (option)
Operation data
Power supply
110 … 230 V
Operation data
Power consumption
300 VA
Operation data
Nominal current
2.5 A
Operation data
Operating temperature
5 … 35 °C
Operation data
Relative humidity
max 80 % (non-condensing)
Operation panel
Keys
home, function menu, memory card, print start, test print, label feed
Operation panel
Touch-screen display
800 x 480 pixel with background lighting
screen size 6.5"
Settings
Default settings
date, time, shift times
11 language settings (other languages on request)
device parameters, network, remote console, interfaces, emulation, password protection
Monitoring
Stop printing if
end of ribbon, end of labels
Monitoring
Status report
extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters, network parameters
printout of all internal fonts and all supported bar codes
Fonts
Font types
6 bitmap fonts
8 vector fonts/TrueType fonts
6 proportional fonts
other fonts on request
Fonts
Character sets
Windows 1250 up to 1257, DOS 437, 850, 852, 857, UTF-8
all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported
other character sets on request
Fonts
Bitmap fonts
size in width and height 0.8 … 5.6
zoom 2 … 9
orientation 0°, 90°, 180°, 270°
Fonts
Vector fonts/ TrueType fonts
size in width and height 1 … 99 mm
variable zoom
orientation 0°, 90°, 180°, 270°
Fonts
Font attributes
depending on character font
bold, italic, inverse, vertical
Fonts
Font width
variable
Bar codes
1D bar codes
CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E
Bar codes
2D bar codes
Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417, QR Code
Bar codes
Composite bar codes
GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated
Bar codes
all bar codes are variable in height, module width and ratio
orientation 0°, 90°, 180°, 270°
optionally with check digit and human readable line
Software
Configuration
ConfigTool
Software
Process control
NiceLabel
Software
Label software
Labelstar Office | LITE
Labelstar Office
Software
Windows driver
Windows 7® 32/64 Bit
Windows 8® 32/64 Bit
Windows 8.1® 32/64 Bit
Windows 10® 32/64 Bit
Windows Server 2008® (R2) 64 Bit
Windows Server 2012® 64 Bit
Windows Server 2012® (R2) 64 Bit
Printing
Print resolution
300 dpi
Printing
Print speed
max 350 mm/s
Printing
Print width
105.7 mm
Printing
Passage width
116 mm
Printing
Label width
min 15 mm
Printing
Label height
max 3000 mm
Printing
Label height
standard: min 6 mm
dispenser mode/cutter mode: min 25 mm
Printing
Printhead
Flat Type for thermal transfer
Labels
Adhesive labels, continuous labels
paper, cardboard, textile, synthetics
Labels
Material weight
max 220 g/m² (other weight on request)
Labels
Roll diameter
internal unwinder: max 200 mm
internal rewinder: max 200 mm (option)
Labels
Core diameter
40 mm
75 mm (option)
Labels
Winding
outside or inside
Labels
Label sensor
standard: transmission and reflexion from below
option: transmission and reflexion from above, ultrasonic photocell
Transfer ribbon
Ink
outside or inside
Transfer ribbon
Roll diameter
max Ø 90 mm
Transfer ribbon
Core diameter
25.4 mm / 1"
Transfer ribbon
Length
max 600 m
Transfer ribbon
Width
max 110 mm
Dimensions
Width x height x depth
287 x 380 x 503 mm
Dimensions
Weight
19 kg
Electronics
Processor
High Speed 32 Bit
Electronics
RAM
16 MB
Electronics
Slot
for Compact Flash Card type I
Electronics
Battery cache
for real-time clock (data storage when shutdown)
Electronics
Warning signal
acoustic signal when error
Interfaces
Serial
RS-232C (up to 115200 baud)
Interfaces
Parallel
Centronics (SPP)
Interfaces
USB
2.0 High Speed Slave
Interfaces
Ethernet
10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP
Interfaces
2 x USB Master
connection for external USB keyboard and memory stick
Interfaces
WLAN
module 802.11 b/g/n WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, EAP (option)
Operation data
Power supply
110 … 230 V
Operation data
Power consumption
300 VA
Operation data
Nominal current
2.5 A
Operation data
Operating temperature
5 … 35 °C
Operation data
Relative humidity
max 80 % (non-condensing)
Operation panel
Keys
home, function menu, memory card, print start, test print, label feed
Operation panel
Touch-screen display
800 x 480 pixel with background lighting
screen size 6.5"
Settings
Default settings
date, time, shift times
11 language settings (other languages on request)
device parameters, network, remote console, interfaces, emulation, password protection
Monitoring
Stop printing if
end of ribbon, end of labels
Monitoring
Status report
extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters, network parameters
printout of all internal fonts and all supported bar codes
Fonts
Font types
6 bitmap fonts
8 vector fonts/TrueType fonts
6 proportional fonts
other fonts on request
Fonts
Character sets
Windows 1250 up to 1257, DOS 437, 850, 852, 857, UTF-8
all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported
other character sets on request
Fonts
Bitmap fonts
size in width and height 0.8 … 5.6
zoom 2 … 9
orientation 0°, 90°, 180°, 270°
Fonts
Vector fonts/ TrueType fonts
size in width and height 1 … 99 mm
variable zoom
orientation 0°, 90°, 180°, 270°
Fonts
Font attributes
depending on character font
bold, italic, inverse, vertical
Fonts
Font width
variable
Bar codes
1D bar codes
CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E
Bar codes
2D bar codes
Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417, QR Code
Bar codes
Composite bar codes
GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated
Bar codes
all bar codes are variable in height, module width and ratio
orientation 0°, 90°, 180°, 270°
optionally with check digit and human readable line
Software
Configuration
ConfigTool
Software
Process control
NiceLabel
Software
Label software
Labelstar Office | LITE
Labelstar Office
Software
Windows driver
Windows 7® 32/64 Bit
Windows 8® 32/64 Bit
Windows 8.1® 32/64 Bit
Windows 10® 32/64 Bit
Windows Server 2008® (R2) 64 Bit
Windows Server 2012® 64 Bit
Windows Server 2012® (R2) 64 Bit
Printing
Print resolution
600 dpi
Printing
Print speed
max 100 mm/s
Printing
Print width
105.6 mm
Printing
Passage width
116 mm
Printing
Label width
min 15 mm
Printing
Label height
max 750 mm
Printing
Label height
standard: min 6 mm
dispenser mode/cutter mode: min 25 mm
Printing
Printhead
Flat Type for thermal transfer
Labels
Adhesive labels, continuous labels
paper, cardboard, textile, synthetics
Labels
Material weight
max 220 g/m² (other weight on request)
Labels
Roll diameter
internal unwinder: max 200 mm
internal rewinder: max 200 mm (option)
Labels
Core diameter
40 mm
75 mm (option)
Labels
Winding
outside or inside
Labels
Label sensor
standard: transmission and reflexion from below
option: transmission and reflexion from above, ultrasonic photocell
Transfer ribbon
Ink
outside or inside
Transfer ribbon
Roll diameter
max Ø 90 mm
Transfer ribbon
Core diameter
25.4 mm / 1"
Transfer ribbon
Length
max 600 m
Transfer ribbon
Width
max 110 mm
Dimensions
Width x height x depth
287 x 380 x 503 mm
Dimensions
Weight
19 kg
Electronics
Processor
High Speed 32 Bit
Electronics
RAM
16 MB
Electronics
Slot
for Compact Flash Card type I
Electronics
Battery cache
for real-time clock (data storage when shutdown)
Electronics
Warning signal
acoustic signal when error
Interfaces
Serial
RS-232C (up to 115200 baud)
Interfaces
Parallel
Centronics (SPP)
Interfaces
USB
2.0 High Speed Slave
Interfaces
Ethernet
10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP
Interfaces
2 x USB Master
connection for external USB keyboard and memory stick
Interfaces
WLAN
module 802.11 b/g/n WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, EAP (option)
Operation data
Power supply
110 … 230 V
Operation data
Power consumption
300 VA
Operation data
Nominal current
2.5 A
Operation data
Operating temperature
5 … 35 °C
Operation data
Relative humidity
max 80 % (non-condensing)
Operation panel
Keys
home, function menu, memory card, print start, test print, label feed
Operation panel
Touch-screen display
800 x 480 pixel with background lighting
screen size 6.5"
Settings
Default settings
date, time, shift times
11 language settings (other languages on request)
device parameters, network, remote console, interfaces, emulation, password protection
Monitoring
Stop printing if
end of ribbon, end of labels
Monitoring
Status report
extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters, network parameters
printout of all internal fonts and all supported bar codes
Fonts
Font types
6 bitmap fonts
8 vector fonts/TrueType fonts
6 proportional fonts
other fonts on request
Fonts
Character sets
Windows 1250 up to 1257, DOS 437, 850, 852, 857, UTF-8
all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported
other character sets on request
Fonts
Bitmap fonts
size in width and height 0.8 … 5.6
zoom 2 … 9
orientation 0°, 90°, 180°, 270°
Fonts
Vector fonts/ TrueType fonts
size in width and height 1 … 99 mm
variable zoom
orientation 0°, 90°, 180°, 270°
Fonts
Font attributes
depending on character font
bold, italic, inverse, vertical
Fonts
Font width
variable
Bar codes
1D bar codes
CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E
Bar codes
2D bar codes
Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417, QR Code
Bar codes
Composite bar codes
GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated
Bar codes
all bar codes are variable in height, module width and ratio
orientation 0°, 90°, 180°, 270°
optionally with check digit and human readable line
Software
Configuration
ConfigTool
Software
Process control
NiceLabel
Software
Label software
Labelstar Office | LITE
Labelstar Office
Software
Windows driver
Windows 7® 32/64 Bit
Windows 8® 32/64 Bit
Windows 8.1® 32/64 Bit
Windows 10® 32/64 Bit
Windows Server 2008® (R2) 64 Bit
Windows Server 2012® 64 Bit
Windows Server 2012® (R2) 64 Bit
Printing
Print resolution
300 dpi
Printing
Print speed
max 350 mm/s
Printing
Print width
106.6 mm
Printing
Passage width
116 mm
Printing
Label width
min 15 mm
Printing
Label height
max 3000 mm
Printing
Label height
standard: min 6 mm
dispenser mode/cutter mode: min 25 mm
Printing
Printhead
Corner Type for thermal transfer
Labels
Adhesive labels, continuous labels
paper, cardboard, textile, synthetics
Labels
Material weight
max 220 g/m² (other weight on request)
Labels
Roll diameter
internal unwinder: max 200 mm
internal rewinder: max 200 mm (option)
Labels
Core diameter
40 mm
75 mm (option)
Labels
Winding
outside or inside
Labels
Label sensor
standard: transmission and reflexion from below
option: transmission and reflexion from above, ultrasonic photocell
Transfer ribbon
Ink
outside or inside
Transfer ribbon
Roll diameter
max Ø 90 mm
Transfer ribbon
Core diameter
25.4 mm / 1"
Transfer ribbon
Length
max 600 m
Transfer ribbon
Width
max 110 mm
Dimensions
Width x height x depth
287 x 380 x 503 mm
Dimensions
Weight
19 kg
Electronics
Processor
High Speed 32 Bit
Electronics
RAM
16 MB
Electronics
Slot
for Compact Flash Card type I
Electronics
Battery cache
for real-time clock (data storage when shutdown)
Electronics
Warning signal
acoustic signal when error
Interfaces
Serial
RS-232C (up to 115200 baud)
Interfaces
Parallel
Centronics (SPP)
Interfaces
USB
2.0 High Speed Slave
Interfaces
Ethernet
10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP
Interfaces
2 x USB Master
connection for external USB keyboard and memory stick
Interfaces
WLAN
module 802.11 b/g/n WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, EAP (option)
Operation data
Power supply
110 … 230 V
Operation data
Power consumption
300 VA
Operation data
Nominal current
2.5 A
Operation data
Operating temperature
5 … 35 °C
Operation data
Relative humidity
max 80 % (non-condensing)
Operation panel
Keys
home, function menu, memory card, print start, test print, label feed
Operation panel
Touch-screen display
800 x 480 pixel with background lighting
screen size 6.5"
Settings
Default settings
date, time, shift times
11 language settings (other languages on request)
device parameters, network, remote console, interfaces, emulation, password protection
Monitoring
Stop printing if
end of ribbon, end of labels
Monitoring
Status report
extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters, network parameters
printout of all internal fonts and all supported bar codes
Fonts
Font types
6 bitmap fonts
8 vector fonts/TrueType fonts
6 proportional fonts
other fonts on request
Fonts
Character sets
Windows 1250 up to 1257, DOS 437, 850, 852, 857, UTF-8
all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported
other character sets on request
Fonts
Bitmap fonts
size in width and height 0.8 … 5.6
zoom 2 … 9
orientation 0°, 90°, 180°, 270°
Fonts
Vector fonts/ TrueType fonts
size in width and height 1 … 99 mm
variable zoom
orientation 0°, 90°, 180°, 270°
Fonts
Font attributes
depending on character font
bold, italic, inverse, vertical
Fonts
Font width
variable
Bar codes
1D bar codes
CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E
Bar codes
2D bar codes
Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417, QR Code
Bar codes
Composite bar codes
GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated
Bar codes
all bar codes are variable in height, module width and ratio
orientation 0°, 90°, 180°, 270°
optionally with check digit and human readable line
Software
Configuration
ConfigTool
Software
Process control
NiceLabel
Software
Label software
Labelstar Office | LITE
Labelstar Office
Software
Windows driver
Windows 7® 32/64 Bit
Windows 8® 32/64 Bit
Windows 8.1® 32/64 Bit
Windows 10® 32/64 Bit
Windows Server 2008® (R2) 64 Bit
Windows Server 2012® 64 Bit
Windows Server 2012® (R2) 64 Bit
Printing
Print resolution
300 dpi
Printing
Print speed
max 350 mm/s
Printing
Print width
108.4 mm
Printing
Passage width
116 mm
Printing
Label width
min 15 mm
Printing
Label height
max 3000 mm
Printing
Label height
standard: min 6 mm
dispenser mode/cutter mode: min 25 mm
Printing
Printhead
Flat Type for thermal direct
Labels
Adhesive labels, continuous labels
paper, cardboard, textile, synthetics
Labels
Material weight
max 220 g/m² (other weight on request)
Labels
Roll diameter
internal unwinder: max 200 mm
internal rewinder: max 200 mm (option)
Labels
Core diameter
40 mm
75 mm (option)
Labels
Winding
outside or inside
Labels
Label sensor
standard: transmission and reflexion from below
option: transmission and reflexion from above, ultrasonic photocell
Transfer ribbon
Ink
outside or inside
Transfer ribbon
Roll diameter
max Ø 90 mm
Transfer ribbon
Core diameter
25.4 mm / 1"
Transfer ribbon
Length
max 600 m
Transfer ribbon
Width
max 110 mm
Dimensions
Width x height x depth
287 x 380 x 503 mm
Dimensions
Weight
19 kg
Electronics
Processor
High Speed 32 Bit
Electronics
RAM
16 MB
Electronics
Slot
for Compact Flash Card type I
Electronics
Battery cache
for real-time clock (data storage when shutdown)
Electronics
Warning signal
acoustic signal when error
Interfaces
Serial
RS-232C (up to 115200 baud)
Interfaces
Parallel
Centronics (SPP)
Interfaces
USB
2.0 High Speed Slave
Interfaces
Ethernet
10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP
Interfaces
2 x USB Master
connection for external USB keyboard and memory stick
Interfaces
WLAN
module 802.11 b/g/n WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, EAP (option)
Operation data
Power supply
110 … 230 V
Operation data
Power consumption
300 VA
Operation data
Nominal current
2.5 A
Operation data
Operating temperature
5 … 35 °C
Operation data
Relative humidity
max 80 % (non-condensing)
Operation panel
Keys
home, function menu, memory card, print start, test print, label feed
Operation panel
Touch-screen display
800 x 480 pixel with background lighting
screen size 6.5"
Settings
Default settings
date, time, shift times
11 language settings (other languages on request)
device parameters, network, remote console, interfaces, emulation, password protection
Monitoring
Stop printing if
end of ribbon, end of labels
Monitoring
Status report
extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters, network parameters
printout of all internal fonts and all supported bar codes
Fonts
Font types
6 bitmap fonts
8 vector fonts/TrueType fonts
6 proportional fonts
other fonts on request
Fonts
Character sets
Windows 1250 up to 1257, DOS 437, 850, 852, 857, UTF-8
all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported
other character sets on request
Fonts
Bitmap fonts
size in width and height 0.8 … 5.6
zoom 2 … 9
orientation 0°, 90°, 180°, 270°
Fonts
Vector fonts/ TrueType fonts
size in width and height 1 … 99 mm
variable zoom
orientation 0°, 90°, 180°, 270°
Fonts
Font attributes
depending on character font
bold, italic, inverse, vertical
Fonts
Font width
variable
Bar codes
1D bar codes
CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E
Bar codes
2D bar codes
Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417, QR Code
Bar codes
Composite bar codes
GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated
Bar codes
all bar codes are variable in height, module width and ratio
orientation 0°, 90°, 180°, 270°
optionally with check digit and human readable line
Software
Configuration
ConfigTool
Software
Process control
NiceLabel
Software
Label software
Labelstar Office | LITE
Labelstar Office
Software
Windows driver
Windows 7® 32/64 Bit
Windows 8® 32/64 Bit
Windows 8.1® 32/64 Bit
Windows 10® 32/64 Bit
Windows Server 2008® (R2) 64 Bit
Windows Server 2012® 64 Bit
Windows Server 2012® (R2) 64 Bit
Printing
Print resolution
300 dpi
Printing
Print speed
max 300 mm/s
Printing
Print width
160 mm
Printing
Passage width
176 mm
Printing
Label width
min 50 mm
Printing
Label height
max 2000 mm
Printing
Label height
standard: min 15 mm
dispenser mode/cutter mode: min 25 mm
Printing
Printhead
Corner Type for thermal transfer
Labels
Adhesive labels, continuous labels
paper, cardboard, textile, synthetics
Labels
Material weight
max 220 g/m² (other weight on request)
Labels
Roll diameter
internal unwinder: max 200 mm
internal rewinder: max 200 mm (option)
Labels
Core diameter
40 mm
75 mm (option)
Labels
Winding
outside or inside
Labels
Label sensor
standard: transmission and reflexion from below
option: transmission and reflexion from above, ultrasonic photocell
Transfer ribbon
Ink
outside or inside
Transfer ribbon
Roll diameter
max Ø 90 mm
Transfer ribbon
Core diameter
25.4 mm / 1"
Transfer ribbon
Length
max 600 m
Transfer ribbon
Width
max 163 mm
Dimensions
Width x height x depth
337 x 380 x 503 mm
Dimensions
Weight
21 kg
Electronics
Processor
High Speed 32 Bit
Electronics
RAM
16 MB
Electronics
Slot
for Compact Flash Card type I
Electronics
Battery cache
for real-time clock (data storage when shutdown)
Electronics
Warning signal
acoustic signal when error
Interfaces
Serial
RS-232C (up to 115200 baud)
Interfaces
Parallel
Centronics (SPP)
Interfaces
USB
2.0 High Speed Slave
Interfaces
Ethernet
10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP
Interfaces
2 x USB Master
connection for external USB keyboard and memory stick
Interfaces
WLAN
module 802.11 b/g/n WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, EAP (option)
Operation data
Power supply
110 … 230 V
Operation data
Power consumption
300 VA
Operation data
Nominal current
2.5 A
Operation data
Operating temperature
5 … 35 °C
Operation data
Relative humidity
max 80 % (non-condensing)
Operation panel
Keys
home, function menu, memory card, print start, test print, label feed
Operation panel
Touch-screen display
800 x 480 pixel with background lighting
screen size 6.5"
Settings
Default settings
date, time, shift times
11 language settings (other languages on request)
device parameters, network, remote console, interfaces, emulation, password protection
Monitoring
Stop printing if
end of ribbon, end of labels
Monitoring
Status report
extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters, network parameters
printout of all internal fonts and all supported bar codes
Fonts
Font types
6 bitmap fonts
8 vector fonts/TrueType fonts
6 proportional fonts
other fonts on request
Fonts
Character sets
Windows 1250 up to 1257, DOS 437, 850, 852, 857, UTF-8
all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported
other character sets on request
Fonts
Bitmap fonts
size in width and height 0.8 … 5.6
zoom 2 … 9
orientation 0°, 90°, 180°, 270°
Fonts
Vector fonts/ TrueType fonts
size in width and height 1 … 99 mm
variable zoom
orientation 0°, 90°, 180°, 270°
Fonts
Font attributes
depending on character font
bold, italic, inverse, vertical
Fonts
Font width
variable
Bar codes
1D bar codes
CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E
Bar codes
2D bar codes
Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417, QR Code
Bar codes
Composite bar codes
GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated
Bar codes
all bar codes are variable in height, module width and ratio
orientation 0°, 90°, 180°, 270°
optionally with check digit and human readable line
Software
Configuration
ConfigTool
Software
Process control
NiceLabel
Software
Label software
Labelstar Office | LITE
Labelstar Office
Software
Windows driver
Windows 7® 32/64 Bit
Windows 8® 32/64 Bit
Windows 8.1® 32/64 Bit
Windows 10® 32/64 Bit
Windows Server 2008® (R2) 64 Bit
Windows Server 2012® 64 Bit
Windows Server 2012® (R2) 64 Bit
Printing
Print resolution
300 dpi
Printing
Print speed
max 300 mm/s
Printing
Print width
162.6 mm
Printing
Passage width
176 mm
Printing
Label width
min 50 mm
Printing
Label height
max 2000 mm
Printing
Label height
standard: min 15 mm
dispenser mode/cutter mode: min 25 mm
Printing
Printhead
Flat Type for thermal transfer and thermal direct
Labels
Adhesive labels, continuous labels
paper, cardboard, textile, synthetics
Labels
Material weight
max 220 g/m² (other weight on request)
Labels
Roll diameter
internal unwinder: max 200 mm
internal rewinder: max 200 mm (option)
Labels
Core diameter
40 mm
75 mm (option)
Labels
Winding
outside or inside
Labels
Label sensor
standard: transmission and reflexion from below
option: transmission and reflexion from above, ultrasonic photocell
Transfer ribbon
Ink
outside or inside
Transfer ribbon
Roll diameter
max Ø 90 mm
Transfer ribbon
Core diameter
25.4 mm / 1"
Transfer ribbon
Length
max 600 m
Transfer ribbon
Width
max 170 mm
Dimensions
Width x height x depth
337 x 380 x 503 mm
Dimensions
Weight
21 kg
Electronics
Processor
High Speed 32 Bit
Electronics
RAM
16 MB
Electronics
Slot
for Compact Flash Card type I
Electronics
Battery cache
for real-time clock (data storage when shutdown)
Electronics
Warning signal
acoustic signal when error
Interfaces
Serial
RS-232C (up to 115200 baud)
Interfaces
Parallel
Centronics (SPP)
Interfaces
USB
2.0 High Speed Slave
Interfaces
Ethernet
10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP
Interfaces
2 x USB Master
connection for external USB keyboard and memory stick
Interfaces
WLAN
module 802.11 b/g/n WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, EAP (option)
Operation data
Power supply
110 … 230 V
Operation data
Power consumption
300 VA
Operation data
Nominal current
2.5 A
Operation data
Operating temperature
5 … 35 °C
Operation data
Relative humidity
max 80 % (non-condensing)
Operation panel
Keys
home, function menu, memory card, print start, test print, label feed
Operation panel
Touch-screen display
800 x 480 pixel with background lighting
screen size 6.5"
Settings
Default settings
date, time, shift times
11 language settings (other languages on request)
device parameters, network, remote console, interfaces, emulation, password protection
Monitoring
Stop printing if
end of ribbon, end of labels
Monitoring
Status report
extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters, network parameters
printout of all internal fonts and all supported bar codes
Fonts
Font types
6 bitmap fonts
8 vector fonts/TrueType fonts
6 proportional fonts
other fonts on request
Fonts
Character sets
Windows 1250 up to 1257, DOS 437, 850, 852, 857, UTF-8
all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported
other character sets on request
Fonts
Bitmap fonts
size in width and height 0.8 … 5.6
zoom 2 … 9
orientation 0°, 90°, 180°, 270°
Fonts
Vector fonts/ TrueType fonts
size in width and height 1 … 99 mm
variable zoom
orientation 0°, 90°, 180°, 270°
Fonts
Font attributes
depending on character font
bold, italic, inverse, vertical
Fonts
Font width
variable
Bar codes
1D bar codes
CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E
Bar codes
2D bar codes
Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417, QR Code
Bar codes
Composite bar codes
GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated
Bar codes
all bar codes are variable in height, module width and ratio
orientation 0°, 90°, 180°, 270°
optionally with check digit and human readable line
Software
Configuration
ConfigTool
Software
Process control
NiceLabel
Software
Label software
Labelstar Office | LITE
Labelstar Office
Software
Windows driver
Windows 7® 32/64 Bit
Windows 8® 32/64 Bit
Windows 8.1® 32/64 Bit
Windows 10® 32/64 Bit
Windows Server 2008® (R2) 64 Bit
Windows Server 2012® 64 Bit
Windows Server 2012® (R2) 64 Bit
Printing
Print resolution
300 dpi
Printing
Print speed
max 200 mm/s
Printing
Print width
216.8 mm
Printing
Passage width
226 mm
Printing
Label width
min 100 mm
Printing
Label height
max 1000 mm
Printing
Label height
standard: min 15 mm
dispenser mode/cutter mode: min 25 mm
Printing
Printhead
Flat Type for thermal transfer and thermal direct
Labels
Adhesive labels, continuous labels
paper, cardboard, textile, synthetics
Labels
Material weight
max 220 g/m² (other weight on request)
Labels
Roll diameter
internal unwinder: max 200 mm
internal rewinder: max 200 mm (option)
Labels
Core diameter
40 mm
75 mm (option)
Labels
Winding
outside or inside
Labels
Label sensor
standard: transmission and reflexion from below
option: transmission and reflexion from above
Transfer ribbon
Ink
outside or inside
Transfer ribbon
Roll diameter
max Ø 90 mm
Transfer ribbon
Core diameter
25.4 mm / 1"
Transfer ribbon
Length
max 600 m
Transfer ribbon
Width
max 220 mm
Dimensions
Width x height x depth
387 x 380 x 503 mm
Dimensions
Weight
28 kg
Electronics
Processor
High Speed 32 Bit
Electronics
RAM
16 MB
Electronics
Slot
for Compact Flash Card type I
Electronics
Battery cache
for real-time clock (data storage when shutdown)
Electronics
Warning signal
acoustic signal when error
Interfaces
Serial
RS-232C (up to 115200 baud)
Interfaces
Parallel
Centronics (SPP)
Interfaces
USB
2.0 High Speed Slave
Interfaces
Ethernet
10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP
Interfaces
2 x USB Master
connection for external USB keyboard and memory stick
Interfaces
WLAN
module 802.11 b/g/n WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, EAP (option)
Operation data
Power supply
110 … 230 V
Operation data
Power consumption
300 VA
Operation data
Nominal current
2.5 A
Operation data
Operating temperature
5 … 35 °C
Operation data
Relative humidity
max 80 % (non-condensing)
Operation panel
Keys
home, function menu, memory card, print start, test print, label feed
Operation panel
Touch-screen display
800 x 480 pixel with background lighting
screen size 6.5"
Settings
Default settings
date, time, shift times
11 language settings (other languages on request)
device parameters, network, remote console, interfaces, emulation, password protection
Monitoring
Stop printing if
end of ribbon, end of labels
Monitoring
Status report
extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters, network parameters
printout of all internal fonts and all supported bar codes
Fonts
Font types
6 bitmap fonts
8 vector fonts/TrueType fonts
6 proportional fonts
other fonts on request
Fonts
Character sets
Windows 1250 up to 1257, DOS 437, 850, 852, 857, UTF-8
all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported
other character sets on request
Fonts
Bitmap fonts
size in width and height 0.8 … 5.6
zoom 2 … 9
orientation 0°, 90°, 180°, 270°
Fonts
Vector fonts/ TrueType fonts
size in width and height 1 … 99 mm
variable zoom
orientation 0°, 90°, 180°, 270°
Fonts
Font attributes
depending on character font
bold, italic, inverse, vertical
Fonts
Font width
variable
Bar codes
1D bar codes
CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E
Bar codes
2D bar codes
Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417, QR Code
Bar codes
Composite bar codes
GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated
Bar codes
all bar codes are variable in height, module width and ratio
orientation 0°, 90°, 180°, 270°
optionally with check digit and human readable line
Software
Configuration
ConfigTool
Software
Process control
NiceLabel
Software
Label software
Labelstar Office | LITE
Labelstar Office
Software
Windows driver
Windows 7® 32/64 Bit
Windows 8® 32/64 Bit
Windows 8.1® 32/64 Bit
Windows 10® 32/64 Bit
Windows Server 2008® (R2) 64 Bit
Windows Server 2012® 64 Bit
Windows Server 2012® (R2) 64 Bit
Subject to alterations
7126

Additional toroidal 75 mm cpl for rewinder

Additional toroidals
7215061

For the use of 75 mm cardboard core instead of 40 mm (standard).

7125

Additional toroidal 75 mm cpl for unwinder

Additional toroidals
7215060

For the use of 75 mm cardboard core instead of 40 mm (standard).

7124

Connection set for rewinder and unwinder

Connection sets
9266090

For exact adjustment of external rewinding units PR 12, PR 17, PR 45 II and the external unwinding unit PA 50A to the printer.

7107

Cutter unit for Spectra II 10X

Cutter units
9088860A

The half-rotary cutter permits cutting of labels up to 200 g/m².


Single cut, interval cut and final cut can be selected.

7108

Cutter unit for Spectra II 16X

Cutter units
9088960A

The half-rotary cutter permits cutting of labels up to 200 g/m².


Single cut, interval cut and final cut can be selected.

7111

Dispenser with photocell for Spectra II 10X

Dispenser units
9088855

The photocell recognizes the label in the dispensing position and interrupts the print order. After removing the label by hand the next label is printed immediately.

7112

Dispenser with photocell for Spectra II 16X

Dispenser units
9088955

The photocell recognizes the label in the dispensing position and interrupts the print order. After removing the label by hand the next label is printed immediately.

7109

Dispenser without photocell for Spectra II 10X

Dispenser units
9088850

The dispenser unit is controlled by a manual switch, foot switch or an external control signal.

7110

Dispenser without photocell for Spectra II 16X

Dispenser units
9088950

The dispenser unit is controlled by a manual switch, foot switch or an external control signal.

7113

Dispenser inputs/outputs

Inputs/Outputs
9088785A

With 8 specified inputs and outputs, different functions of the printer can be released and operating conditions be shown.

7132

Leporello guiding for Spectra II 10X

Leporello guiding
9088890

For the use of folded (zigzag) label material.

7133

Leporello guiding for Spectra II 16X

Leporello guiding
9088990

For the use of folded (zigzag) label material.

7287

Ultrasonic label photocell for Spectra II 103/104/106/108

Photocells
9088896A

For transparent labels on transparent liner.


With extra charge for new printer (no retrofit possible).

7282

Ultrasonic label photocell for Spectra II 107

Photocells
9088897A

For transparent labelw on transparent liner.


With extra charge for new printer (no retrofit possible).

7272

Ultrasonic label photocell for Spectra II 160

Photocells
9088997A

For transparent labels on transparent liner.


With extra charge for new printer (no retrofit possible).

7277

Ultrasonic label photocell for Spectra II 162

Photocells
9088996A

For transparent labels on transparent liner.


With extra charge for new printer (no retrofit possible).

7115

Internal rewinder for Spectra II 10X

Rewinder units
9088870A

For rewinding label rolls after printing inside the printer.


In dispensing mode, for rewinding the liner.


Max external diameter of label roll: 200 mm


Label winding: outside

7120

Additional toroidal cpl 75 mm, assembly set PR 45

Rewinder units
9266018

For the use of 75 mm cardboard core instead of 40 mm (standard).

7121

Label rewinder PR 12

Rewinder units
9252120

PR 12 for rewinding the labels after printing


Max external diameter of label roll: 300 mm


Max label width: 120 mm (Spectra 10X)


Label winding: inside/outside


Core diameter: 40 mm (optional 75 mm)

7122

Label rewinder PR 17

Rewinder units
9252220

PR 17 for rewinding the labels after printing


Max external diameter of label roll: 300 mm


Max label width: 180 mm (Spectra 16X)


Label winding: outside/inside


Core diameter: 40 mm on cardboard core or winding axis


76 mm on cardboard core using adapter

7119

Label rewinder PR 45 II

Rewinder units
9266014

PR 45 II for rewinding the labels after printing


Max external diameter of label roll: 270 mm


Label winding: outside/inside


Core diameter: 40 mm (optional 75 mm)

7123

Label unwinder PA 50A

Rewinder units
9266050A

PA 50A for unwinding large label rolls


Max external diameter of label roll 300 mm


Label winding: outside/inside


Core diameter: 40 mm (optional 75 mm)

1927

Label unwinder PA 50A

Rewinder units
9266050A

PA 50A for unwinding large label rolls


Max external diameter of label roll 300 mm


Label winding: outside/inside


Core diameter: 40 mm (optional 75 mm)

7116

Internal rewinder for Spectra II 10X

Rewinder units
9088875A

For rewinding label rolls after printing inside the printer.


In dispensing mode, for rewinding the liner.


Max external diameter of label roll: 200 mm


Label winding: inside

7117

Internal rewinder for Spectra II 16X

Rewinder units
9088970A

For rewinding label rolls after printing inside the printer.


In dispensing mode, for rewinding the liner.


Max external diameter of label roll: 200 mm


Label winding: outside

7118

Internal rewinder for Spectra II 16X

Rewinder units
9088975A

For rewinding label rolls after printing inside the printer.


In dispensing mode, for rewinding the liner.


Max external diameter of label roll: 200 mm


Label winding: inside

7127

Ribbon save for Spectra II 107

Ribbon save
9088840A

For a maximum utilization of transfer ribbon.

7128

Ribbon save for Spectra II 10X Flat Type

Ribbon save
9088842A

For a maximum utilization of transfer ribbon.

7129

Ribbon save for Spectra II 160

Ribbon save
9088940A

For a maximum utilization of transfer ribbon.

7130

Ribbon save for Spectra II 162 Flat Type

Ribbon save
9088942A

For a maximum utilization of transfer ribbon.

7114

Compact Flash Card 2GB

Speicherkarten
3702014

2 GB Compact Flash card

7131

Tear-off plate above for Spectra II 16X

Tear-off plates
9088993

After terminating the print order the labels can be separated by hand.

7134

WLAN

WLAN
9088775A

WLAN card 802.11b/g WEP/WPA PSK (TKIP)

CARL VALENTIN GMBH ·
Neckarstraße 78 - 86 u. 94 ·
78056 Villingen-Schwenningen

Tel. +49 7720 9712-0 ·
Distribution centre +49 7720 9712-20 ·
Fax +49 7720 9712-9901 ·
info@domain1.tld