10

Label printers

Micra – affordable label printer

/fileadmin/user_upload/Produkttitelbilder/carl_valentin_etikettendrucker_micra_titelbild_2020-01.jpg

Appealing design and compact overall size

The Micra series prints alternatively in thermal direct or thermal transfer mode. The pleasing design inserts itself into different environments. owing to the amply measured cover label roll and ribbon can be changed simply and fast.


Large label capacities and large transfer ribbon capacities


Despite the small size of housing the printer can be equipped with label rolls up to 127 mm (5“) and ribbons with 300 m length. Idle times caused by replacing the expandable material will be reduced and productivity will be increased.

  • Low-cost starter model for smaller printing volumes
  • Print width up to 106.6 mm
  • Thermal direct or thermal transfer print
  • Serial, parallel and USB port
  • Optional Ethernet/LAN interface
configtool
Ermöglicht Konfigurationen mit professionellem Tool "configTool"
labelstar
nicelabel

Videos

Technical data

Printing
Print resolution

203 dpi

Printing
Print speed

max 100 mm/s

Printing
Print width

104 mm

Printing
Passage width

118 mm

Printing
Label width

min 25 mm

Printing
Label height

standard: max 850 mm


option Ethernet/LAN: max 800 mm

Printing
Label height

standard: min 12 mm


dispenser mode/cutter mode: min 25 mm

Printing
Printhead

Flat Type

Labels
Adhesive labels, continuous labels

paper, cardboard, textile, synthetics

Labels
Material weight

max 220 g/m² (other weight on request)

Labels
Roll diameter

max 127 mm

Labels
Core diameter

25.4 mm, 38.1 mm, 76.2 mm

Labels
Winding

outside or inside

Labels
Label sensor

transmission and reflexion from below

Transfer ribbon
Ink

outside

Transfer ribbon
Roll diameter

max Ø 68 mm

Transfer ribbon
Core diameter

25.4 mm / 1"

Transfer ribbon
Length

max 300 m

Transfer ribbon
Width

max 110 mm

Dimensions
Width x height x depth

226 x 171 x 285 mm

Dimensions
Weight

3 kg

Electronics
Processor

32 Bit RISC

Electronics
RAM

2 MB

Electronics
Battery cache

for real-time clock (data storage when shutdown)

Electronics
Warning signal

acoustic signal when error

Interfaces
Serial

RS-232C (up to 57600 baud)

Interfaces
Parallel

Centronics

Interfaces
USB

1.1

Interfaces
Ethernet

10/100 Base T (option)

Operation data
Power supply

110 … 230 V AC / 50 … 60 Hz

Operation data
Power consumption

max 70 VA

Operation data
Operating temperature

5 … 35 °C

Operation data
Relative humidity

max 80 % (non-condensing)

Monitoring
Stop printing if

end of ribbon, end of labels, printhead open

Monitoring
Status report

extensive status print with information about settings, e.g. print lenght counter, runtime counter, photocell, interface parameters


printout of all internal fonts and all supported bar codes

Fonts
Font types

6 bitmap fonts


6 proportional fonts


other fonts on request

Fonts
Character sets

Windows 1250 up to 1257, 437, 850, 852, 857


all West and East European, Latin, Cyrillic, Greek and Arabic characters are supported


other character sets on request

Fonts
Bitmap fonts

size in width and height 0.8 … 5.6


zoom 2 … 9


orientation 0°, 90°, 180°, 270°

Fonts
Font attributes

depending on character font


bold, italic, inverse, vertical

Fonts
Font width

varible

Bar codes
1D bar codes

CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E

Bar codes
2D bar codes

Aztec Code, CODABLOCK F, DataMatrix, MAXICODE, PDF 417, QR Code

Software
Configuration
Software
Process control
Software
Label software
Software
Windows driver
Printing
Print resolution

300 dpi

Printing
Print speed

max 100 mm/s

Printing
Print width

106 mm

Printing
Passage width

118 mm

Printing
Label width

min 25 mm

Printing
Label height

standard: max 600 mm


option Ethernet/LAN: max 550 mm

Printing
Label height

standard: min 12 mm


dispenser mode/cutter mode: min 25 mm

Printing
Printhead

Flat Type

Labels
Adhesive labels, continuous labels

paper, cardboard, textile, synthetics

Labels
Material weight

max 220 g/m² (other weight on request)

Labels
Roll diameter

max 127 mm

Labels
Core diameter

25.4 mm, 38.1 mm, 76.2 mm

Labels
Winding

outside or inside

Labels
Label sensor

transmission and reflexion from below

Transfer ribbon
Ink

outside

Transfer ribbon
Roll diameter

max Ø 68 mm

Transfer ribbon
Core diameter

25.4 mm / 1"

Transfer ribbon
Length

max 300 m

Transfer ribbon
Width

max 110 mm

Dimensions
Width x height x depth

226 x 171 x 285 mm

Dimensions
Weight

3 kg

Electronics
Processor

32 Bit RISC

Electronics
RAM

2 MB

Electronics
Battery cache

for real-time clock (data storage when shutdown)

Electronics
Warning signal

acoustic signal when error

Interfaces
Serial

RS-232C (up to 57600 baud)

Interfaces
Parallel

Centronics

Interfaces
USB

1.1

Interfaces
Ethernet

10/100 Base T (option)

Operation data
Power supply

110 … 230 V AC / 50 … 60 Hz

Operation data
Power consumption

max 70 VA

Operation data
Operating temperature

5 … 35 °C

Operation data
Relative humidity

max 80 % (non-condensing)

Monitoring
Stop printing if

end of ribbon, end of labels, printhead open

Monitoring
Status report

extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters


printout of all internal fonts and all supported bar codes

Fonts
Font types

6 bitmap fonts


6 proportional fonts


other fonts on request

Fonts
Character sets

Windows 1250 up to 1257, 437, 850, 852, 857


all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported


other character sets on request

Fonts
Bitmap fonts

size in width and heigth 0.8 … 5.6


zoom 2 … 9


orientation 0°, 90°, 180°, 270°

Fonts
Font attributes

depending on character font


bold, italic, inverse, vertical

Fonts
Font width

variable

Bar codes
1D bar codes

CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E

Bar codes
2D bar codes

Aztec Code, CODABLOCK F, DataMatrix, MAXICODE, PDF 417, QR Code

Software
Configuration
Software
Process control
Software
Label software
Software
Windows driver
Subject to alterations

Program Variants

System requirements

Accessories

3088

Cutter unit "Guillotine"

Cutter units
9018865

The guillotine cutter permits cutting of labels up to 170 g/m².

Single cut, interval cut and final cut can be selected.

3089

Cutter unit "Guillotine" with antistatic brush

Cutter units
9018867

The guillotine cutter with antistatic brush permits cutting of labels up to 170 g/m².

Single cut, interval cut and final cut can be selected.

3087

Cutter unit "Rotation"

Cutter units
9018860

The rotary cutter permits cutting of labels up to 200 g/m².

Single cut, interval cut and final cut can be selected.

3090

Dispenser unit with photocell

Dispenser units
9018850

The photocell recognizes the label in the dispensing position and interrupts the print order. After removing the label by hand the next label is printed immediately.

3093

Ethernet interface 10/100 + RTC

Ethernet interface
9018782

10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP

3091

External label unwinder

External label unwinder
9218001

For unwinding large label rolls

Max external diameter of label roll: 250 mm

Label winding: outside/inside

3092

Label rewinder PR 12

Label rewinder
9252120

PR 12 for rewinding the labels after printing

Max external diameter of label roll 210 mm

Label winding: outside/inside

Core diameter: 40 mm (optional 75 mm)

The rewinder has its own power supply.

3094

RTC (Real Time Clock)

RTC (Real Time Clock)
9018784

Real time clock to continue the time even when switching off the printer.

ARISTON PRINT ·
Simwoli ·
GR-62047 Serres

Phone +30 2324 301 051 · Mobil +30 698 011 6703 · Mobil +30 698 011 6730 · info@domain5.tld · www.aristonprint.com