Direct Print Modules

 

Dynacode IP

/fileadmin/user_upload/Produkttitelbilder/carl_valentin_dynacode_ip_titelbild.jpg

Dynacode IP Series


The splash-proof version of the Dynacode offers additional protection in harsh production environments. The optionally available version additionally dispenses with bulky and bothersome covers to protect the device, as neither print module nor control unit must be dismounted or covered during the cleaning process. This means that production downtimes are even further reduced.


The cleaning cassette necessary for this can simply replace the ribbon cassette within seconds. The splash-proof Dynacode version is ideally suited for marking hygienic products and for printing in production environments where wet cleaning is required, such as in dairies or coffee roasting plants.



Water and dust protection equipment


After all the necessary connections have been established to the control unit and all unused connectors have been covered using the appropriate accessory, the control unit is protected against water and dust at all times, in accordance with protection class IP65. Owing to conditions during the operation of direct printing units of this type, the printing mechanism cannot be fully protected against the ingress of water while printing is in progress. However, using the special cleaning cassette, it is possible to protect the printing mechanism during downtimes against the ingress of water and dust in accordance with protection class IP65.

  • Splash-proof electronics and print mechanics
  • Separate transfer ribbon cassette and cleaning cassette
  • Maximum protection in harsh production conditions
  • Electronic control unit is wall-mountable
  • Connection for 24V industrial encoder
  • Cable outlet at rear and on side
  • Audible signal issued in case of fault
optimization
touch panel
configtool
Ermöglicht Konfigurationen mit professionellem Tool "configTool"
labelstar
nicelabel

Videos

Technical data

Printing
Print width

53.3 mm

Printing
Print length

intermittent mode: max 75 mm


continuous mode: max 6000 mm

Printing
Frame passage width

customized

Printing
Print resolution

300 dpi

Printing
Print speed

intermittent mode: 50 … 600 mm/s


continuous mode: 50 … 800 mm/s

Printing
Back speed

max 600 mm/s (intermittent mode only)

Printing
Printhead

Corner Type

Transfer ribbon
Ink

outside / inside (option)

Transfer ribbon
Roll diameter

max 98 mm

Transfer ribbon
Core diameter

25.4 mm / 1"

Transfer ribbon
Length

max 900 m

Transfer ribbon
Width

max 55 mm

Dimensions (width x height x depth)
Print mechanics

without mounting frame: 204 x 182 x 235 mm


with mounting frame: depending on the passage width

Dimensions (width x height x depth)
Contol unit

310 x 165 x 350 mm

Dimensions (width x height x depth)
Connecting cable set to print mechanics

2.5 m

Weight
Print mechanics

9.5 kg

Weight
Control unit

8 kg (including cable)

Electronics
Processor

High Speed 32 Bit

Electronics
RAM

16 MB

Electronics
Slot

for Compact Flash Card type I (inside of control unit)

Electronics
Battery cache

for real-time clock (data storage when shutdown)

Electronics
Warning signal

acoustic signal when error

Interfaces
Serial

RS-232C (up to 115200 baud)

Interfaces
Ethernet

10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP

Interfaces
USB Master

Connection for external USB keyboard and memory stick

Connection values
Pneumatic connection

6 bar dry and oil-free

Connection values
Nominal voltage

110 V … 230 V AC / 50-60 Hz

Connection values
Nominal current

110 V AC / 3 A − 230 V AC / 1,5 A

Connection values
Fuse rating

2x T4A 250 V

Operation data
Ingress protection rating

IP 65

Operation data
Operating temperature

5 … 40 °C

Operation data
Relative humidity

max 80 % (non-condensing)

Operation data
Average sound power level

60 dB(A) - measuring distance 1 m

Operation panel
Keys

Test print, function menu, quantity, CF card, feed, enter, 4 x cursor

Operation panel
LCD display

Graphic display 132 x 64 pixel

Settings
-

date, time, shift times


11 language settings (other languages on request)


label parameters, printer parameters, interfaces, password protection

Monitoring
Stop printing if

end of ribbon, end of foil, printhead open

Monitoring
Status report

extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters, network parameters


printout of all internal fonts and all supported bar codes

Fonts
Font types

6 bitmap fonts


8 vector fonts/TrueType fonts


6 proportional fonts


other fonts on request

Fonts
Character sets

Windows 1250 up to 1257, 437, 850, 852, 857


all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported


other character sets on request

Fonts
Bitmap fonts

size in width and height 0.8 … 5.6


zoom 2 … 9


orientation 0°, 90°, 180°, 270°

Fonts
Vector fonts/<br/>TrueType fonts

size in width and height 1 … 99 mm


variable zoom


orientation 0°, 90°, 180°, 270°

Fonts
Font attributes

depending on character font


bold, italic, inverse, vertical

Fonts
Font width

variable

Bar codes
1D bar codes

CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E

Bar codes
2D bar codes

Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417, QR Code

Bar codes
Composite bar codes

GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated

Bar codes

variable in height, module width and ratio


orientation 0°, 90°, 180°, 270°


optionally with check digit and human readable line

Software
Configuration

ConfigTool

Software
Process control

NiceLabel

Software
Label software

Labelstar Office | LITE


Labelstar Office

Software
Windows driver

Windows 7® 32/64 Bit


Windows 8® 32/64 Bit


Windows 8.1® 32/64 Bit


Windows 10® 32/64 Bit


Windows Server 2008® (R2) 64 Bit


Windows Server 2012® 64 Bit


Windows Server 2012® (R2) 64 Bit

Printing
Print width

106.6 mm

Printing
Print length

intermittent mode: max 75 mm


continuous mode: max 3000 mm

Printing
Frame passage width

customized

Printing
Print resolution

300 dpi

Printing
Print speed

intermittent mode: 50 … 600 mm/s


continuous mode: 50 … 600 mm/s

Printing
Back speed

max 600 mm/s (intermittent mode only)

Printing
Printhead

Corner Type

Transfer ribbon
Ink

outside / inside (option)

Transfer ribbon
Roll diameter

max 82 mm

Transfer ribbon
Core diameter

25.4 mm / 1"

Transfer ribbon
Length

max 600 m

Transfer ribbon
Width

max 110 mm

Dimensions (width x height x depth)
Print mechanics

without mounting frame: 204 x 182 x 290 mm


with mounting frame: depending on the passage width

Dimensions (width x height x depth)
Control unit

310 x 165 x 350 mm

Dimensions (width x height x depth)
Connecting cable set to print mechanics

2.5 m

Weight
Print mechanics

11 kg

Weight
Control unit

8 kg (including cable)

Electronics
Processor

High Speed 32 Bit

Electronics
RAM

16 MB

Electronics
Slot

for Compact Flash Karte Typ I (inside of control unit)

Electronics
Battery cache

for real-time clock (data storage when shutdown)

Electronics
Warning signal

acoustic signal when error

Interfaces
Serial

RS-232C (up to 115200 baud)

Interfaces
Ethernet

10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP

Interfaces
USB Master

connection for external USB keyboard and memory stick

Connection values
Pneumatic connection

6 bar dry and oil-free

Connection values
Nominal voltage

110 V … 230 V AC / 50-60 Hz

Connection values
Nominal current

110 V AC / 3 A − 230 V AC / 1.5 A

Connection values
Fuse rating

2x T4A 250 V

Operation data
Ingress protection rating

IP 65

Operation data
Operating temperature

5 … 40 °C

Operation data
Relative humidity

max 80 % (non-condensing)

Operation data
Average sound power level

65 dB(A) - measuring distance 1 m

Operation panel
Keys

test print, function menu, quantity, CF card,


feed, enter, 4 x cursor

Operation panel
LCD display

graphic display 132 x 64 pixel

Settings
-

date, time, shift times


11 language settings (other languages on request)


label parameters, printer parameters, interfaces, password protection

Monitoring
Stop printing if

end of ribbon, end of foil, printhead open

Monitoring
Status report

extensive status print with information about settings, e.g. print length counter, runtime counter, photcell, interface parameters, network parameters


printout of all internal fonts and all supported bar codes

Fonts
Font types

6 bitmap fonts


8 vector fonts/TrueType fonts


6 proportional fonts


other fonts on request

Fonts
Character sets

Windows 1250 up to 1257, 437, 850, 852, 857


all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported


other character sets on request

Fonts
Bitmap fonts

size in width and height 0.8 … 5.6


zoom 2 … 9


orientation 0°, 90°, 180°, 270°

Fonts
Vector fonts/<br/>TrueType fonts

size in width and height 1 … 99 mm


variable zoom


orientation 0°, 90°, 180°, 270°

Fonts
Font attributes

depending on character font


bold, italic, inverse, vertical

Fonts
Font width

variable

Bar codes
1D bar codes

CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E

Bar codes
2D bar codes

Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417, QR Code

Bar codes
Composite bar codes

GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated

Bar codes

variable in height, module width and ratio


orientation 0°, 90°, 180°, 270°


optionally with check digit and human readable line

Software
Configuration

ConfigTool

Software
Process control

NiceLabel

Software
Label software

Labelstar Office | LITE


Labelstar Office

Software
Windows driver

Windows 7® 32/64 Bit


Windows 8® 32/64 Bit


Windows 8.1® 32/64 Bit


Windows 10® 32/64 Bit


Windows Server 2008® (R2) 64 Bit


Windows Server 2012® 64 Bit


Windows Server 2012® (R2) 64 Bit

Printing
Print width

128 mm

Printing
Print length

intermittent mode: max 75 mm


continuous mode: max 3000 mm

Printing
Frame passage width

customized

Printing
Print resolution

300 dpi

Printing
Print speed

intermittent mode: 50 … 600 mm/s


continuous mode: 50 … 450 mm/s

Printing
Back speed

max 600 mm/s (intermittent mode only)

Printing
Printhead

Corner Type

Transfer ribbon
Ink

outside / inside (option)

Transfer ribbon
Roll diameter

max 75 mm

Transfer ribbon
Core diameter

25.4 mm / 1"

Transfer ribbon
Length

max 450 m

Transfer ribbon
Width

max 130 mm

Dimensions (width x height x depth)
Print mechanics

without mounting frame: 204 x 182 x 310 mm


with mounting frame: depending on the passage width

Dimensions (width x height x depth)
Control unit

310 x 165 x 350 mm

Dimensions (width x height x depth)
Connecting cable set to print mechanics

2.5 m

Weight
Print mechanics

11.7 kg

Weight
Control unit

8 kg (including cable)

Electronics
Processor

High Speed 32 Bit

Electronics
RAM

16 MB

Electronics
Slot

for Compact Flash Card type I (inside of control unit)

Electronics
Battery cache

for real-time clock (data storage when shutdown)

Electronics
Warning signal

acoustic signal when error

Interfaces
Serial

RS-232C (up to 115200 baud)

Interfaces
Ethernet

10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP

Interfaces
USB Master

connection for external USB keyboard and memory stick

Connection values
Pneumatic connection

6 bar dry and oil-free

Connection values
Nominal voltage

110 V … 230 V AC / 50-60 Hz

Connection values
Nominal current

110 V AC / 3 A − 230 V AC / 1.5 A

Connection values
Fuse rating

2x T4A 250 V

Operation data
Ingress protection rating

IP 65

Operation data
Operating temperature

5 … 40 °C

Operation data
Relative humidity

max 80 % (non-condensing)

Operation data
Average sound power level

68 dB(A) - measuring distance 1 m

Operation panel
Keys

test print, function menu, quantity, CF card,


feed, enter, 4 x cursor

Operation panel
LCD display

graphic display 132 x 64 pixel

Settings
-

date, time, shift times


11 language settings (other languages on request)


label parameters, printer parameters, interfaces, password protection

Monitoring
Stop printing if

end of ribbon, end of foil, printhead open

Monitoring
Status report

extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters, network parameters


printout of all internal fonts and all supported bar codes

Fonts
Font types

6 bitmap fonts


8 vector fonts/TrueType fonts


6 proportional fonts


other fonts on request

Fonts
Character sets

Windows 1250 up to 1257, 437, 850, 852, 857


all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported


other character sets on request

Fonts
Bitmap fonts

size in width and height 0.8 … 5.6


zoom 2 … 9


orientation 0°, 90°, 180°, 270°

Fonts
Vector fonts/<br/>TrueType fonts

size in width and height 1…99 mm


variable zoom


orientation 0°, 90°, 180°, 270°

Fonts
Font attributes

depending on character font


bold, italic, inverse, vertical

Fonts
Font width

variable

Bar codes
1D bar codes

CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E

Bar codes
2D bar codes

Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417, QR Code

Bar codes
Composite bar codes

GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated

Bar codes

variable in height, module width and ratio


orientation 0°, 90°, 180°, 270°


optionally with check digit and human readable line

Software
Configuration

ConfigTool

Software
Process control

NiceLabel

Software
Label software

Labelstar Office | LITE


Labelstar Office

Software
Windows driver

Windows 7® 32/64 Bit


Windows 8® 32/64 Bit


Windows 8.1® 32/64 Bit


Windows 10® 32/64 Bit


Windows Server 2008® (R2) 64 Bit


Windows Server 2012® 64 Bit


Windows Server 2012® (R2) 64 Bit

Subject to alterations

Program Variants

System requirements

Accessories

1696

Bogie wheel unit cpl passage width 250 mm

Bogie wheel units
9057700A

With these additional return pulleys for our bracket systems it is possible to react on each foil direction given from the packaging machine.

1697

Bogie wheel unit cpl passage width 340 mm

Bogie wheel units
9057701A

With these additional return pulleys for our bracket systems it is possible to react on each foil direction given from the packaging machine.

1698

Bogie wheel unit cpl passage width 430 mm

Bogie wheel units
9057702A

With these additional return pulleys for our bracket systems it is possible to react on each foil direction given from the packaging machine.

1699

Bogie wheel unit cpl passage width 470 mm

Bogie wheel units
9057704A

With these additional return pulleys for our bracket systems it is possible to react on each foil direction given from the packaging machine.

1700

Bogie wheel unit cpl passage width 620 mm

Bogie wheel units
9057706A

With these additional return pulleys for our bracket systems it is possible to react on each foil direction given from the packaging machine.

1701

Bogie wheel unit cpl passage width 770 mm

Bogie wheel units
9057708A

With these additional return pulleys for our bracket systems it is possible to react on each foil direction given from the packaging machine.

1702

Bracket system passage width
250 mm for continuous mode

Bracket systems
9057725A

For admission of print mechanics and integration in packaging machines with continuously moved material.

1708

Bracket system passage width
250 mm for intermittent mode

Bracket systems
9057825A

For admission of print mechanics and integration in packaging machines with intermittently moved material.

Including counter-pressure plate 130 x 160 mm

1703

Bracket system passage width
340 mm for continuous mode

Bracket systems
9057734A

For admission of print mechanics and integration in packaging machines with continuously moved material.

1709

Bracket system passage width
340 mm for intermittent mode

Bracket systems
9057834A

For admission of print mechanics and integration in packaging machines with intermittently moved material.

Including counter-pressure plate 130 x 160 mm

1704

Bracket system passage width
430 mm for continuous mode

Bracket systems
9057743A

For admission of print mechanics and integration in packaging machines with continuously moved material.

1710

Bracket system passage width
430 mm for intermittent mode

Bracket systems
9057843A

For admission of print mechanics and integration in packaging machines with intermittently moved material.

Including counter-pressure plate 130 x 160 mm

1705

Bracket system passage width
470 mm for continuous mode

Bracket systems
9057747A

For admission of print mechanics and integration in packaging machines with continuously moved material.

1711

Bracket system passage width
470 mm for intermittent mode

Bracket systems
9057847A

For admission of print mechanics and integration in packaging machines with intermittently moved material.

Including counter-pressure plate 130 x 160 mm

1712

Bracket system passage width
620 mm for intermittent mode

Bracket systems
9057862A

For admission of print mechanics and integration in packaging machines with intermittently moved material.

Including counter-pressure plate 130 x 160 mm

1707

Bracket system passage width
770 mm for continuous mode

Bracket systems
9057777A

For admission of print mechanics and integration in packaging machines with continuously moved material.

1713

Bracket system passage width
770 mm for intermittent mode

Bracket systems
9057877A

For admission of print mechanics and integration in packaging machines with intermittently moved material.

Including counter-pressure plate 130 x 160 mm

1706

bracket system passage width
620 mm for continuous mode

Bracket systems
9057762A

For admission of print mechanics and integration in packaging machines with continuously moved material.

1727

Cable outlet to the rear

Cable outlets
9057955

For the outlet of cables to the rear instead of to the side (standard).

With extra charge for new device

1723

Cassette cpl for Dynacode IP107, left version

Cassettes
9057915

For the fast change of transfer ribbon as the cassette can be already equipped with transfer ribbon in advance.

1722

Cassette cpl for Dynacode IP107, right version

Cassettes
9057910

For the fast change of transfer ribbon as the cassette can be already equipped with transfer ribbon in advance.

1725

Cassette cpl for Dynacode IP128, left version

Cassettes
9057925

For the fast change of transfer ribbon as the cassette can be already equipped with transfer ribbon in advance.

1720

Cassette cpl for Dynacode IP53, left version

Cassettes
9057905

For the fast change of transfer ribbon as the cassette can be already equipped with transfer ribbon in advance.

1718

Cassette cpl for Dynacode IP53, right version

Cassettes
9057900

For the fast change of transfer ribbon as the cassette can be already equipped with transfer ribbon in advance.

1724

Cassette cpl for IP128, right version

Cassettes
9057920

For the fast change of transfer ribbon as the cassette can be already equipped with transfer ribbon in advance.

1729

Installation kit, ribbon internally coated for Dynacode IP107

Cassettes
9057967

Return pulley set for the use of internally coated transfer ribbon.

1730

Installation kit, ribbon internally coated for Dynacode IP128

Cassettes
9057968

Return pulley set for the use of internally coated transfer ribbon.

1728

Installation kit, ribbon internally coated for Dynacode IP53

Cassettes
9057965

Return pulley set for the use of internally coated transfer ribbon.

7252

Cleaning cassette cpl for Dynacode IP107, left version

Cleaning cassettes
9057918

For protecting the print mechanics according to protection level IP65 against the ingress of water and dust.

7247

Cleaning cassette cpl for Dynacode IP107, right version

Cleaning cassettes
9057913

For protecting the print mechanics according to protection level IP65 against the ingress of water and dust.

7257

Cleaning cassette cpl for Dynacode IP128, right version

Cleaning cassettes
9057923

For protecting the print mechanics according to protection level IP65 against the ingress of water and dust.

1721

Cleaning cassette cpl for Dynacode IP53, left version

Cleaning cassettes
9057908

For protecting the print mechanics according to protection level IP65 against the ingress of water and dust.

1719

Cleaning cassette cpl for Dynacode IP53, right version

Cleaning cassettes
9057903

For protecting the print mechanics according to protection level IP65 against the ingress of water and dust.

7262

Cleaning cassette cpl. for Dynacode IP128, left version

Cleaning cassettes
9057928

For protecting the print mechanics according to protection level IP65 against the ingress of water and dust.

1736

Compact Flash Card 2GB

Compact Flash
3702014

2 GB Compact Flash Card

1717

Counter-pressure plate cpl 130 x 160 mm

Counter-pressure plate
7267305

Necessary gummed counterface for the printhead as ready-to-install option.

1714

Encoder for CV bracket system
IP 24V with 4.5 m cable length

Encoders
9057940

Encoder for admission of material speed in continuous printing mode.

1715

Encoder for customized bracket
system IP 24V with 4.5 m cable length

Encoders
9057941

Encoder for admission of material speed in continuous printing mode.

1716

Encoder with friction wheel cpl
IP 24V with 4.5 m cable length

Encoders
9057942

Encoder for admission of material speed in continuous printing mode.

1735

Fastening set for controller

Fastening sets
9067770

For the comfortable installation of pressure controller with an angle and a nut.

1690

Registration unit passage width 250 mm

Registration units
9057625A

By the defined redirection of the foil to be printed inside the bracket system, the exact print position (e.g. in the given fields) can be set.

1691

Registration unit passage width 340 mm

Registration units
9057634A

By the defined redirection of the foil to be printed inside the bracket system, the exact print position (e.g. in the given fields) can be set.

1692

Registration unit passage width 430 mm

Registration units
9057643A

By the defined redirection of the foil to be printed inside the bracket system, the exact print position (e.g. in the given fields) can be set.

1693

Registration unit passage width 470 mm

Registration units
9057647A

By the defined redirection of the foil to be printed inside the bracket system, the exact print position (e.g. in the given fields) can be set.

1694

Registration unit passage width 620 mm

Registration units
9057662A

By the defined redirection of the foil to be printed inside the bracket system, the exact print position (e.g. in the given fields) can be set.

1695

Registration unit passage width 770 mm

Registration units
9057677A

By the defined redirection of the foil to be printed inside the bracket system, the exact print position (e.g. in the given fields) can be set.

1733

External power supply unit for Touch Panel

Touch Panels
9057975

Power supply unit for Touch Panel.

1734

Touch Panel 10"

Touch Panels
9403501

For the configuration and monitoring of max 4 printing systems at the same time. This refers to settings of parameters and the control of current print orders.

CARL VALENTIN GMBH ·
Neckarstraße 78 - 86 u. 94 ·
78056 Villingen-Schwenningen

Tel. +49 7720 9712-0 ·
Distribution centre +49 7720 9712-20 ·
Fax +49 7720 9712-9901 ·
info@domain1.tld