Our Products

Micra

  • Low-cost starter model for smaller printing volumes
  • Print width up to 106.6 mm
  • Thermal direct or thermal transfer print
  • Serial, parallel and USB port
  • Optional Ethernet/LAN interface
configtool
Ermöglicht Konfigurationen mit professionellem Tool "configTool"
labelstar
nicelabel

Appealing design and compact overall size


The Micra series prints alternatively in thermal direct or thermal transfer mode. The pleasing design inserts itself into different environments. owing to the amply measured cover label roll and ribbon can be changed simply and fast.


Large label capacities and large transfer ribbon capacities


Despite the small size of housing the printer can be equipped with label rolls up to 127 mm (5“) and ribbons with 300 m length. Idle times caused by replacing the expandable material will be reduced and productivity will be increased.


Additional


Youtube-Playlist "Micra"

Printing
Print resolution
203 dpi
Printing
Print speed
max 100 mm/s
Printing
Print width
104 mm
Printing
Passage width
118 mm
Printing
Label width
min 25 mm
Printing
Label height
standard: max 850 mm
option Ethernet/LAN: max 800 mm
Printing
Label height
standard: min 12 mm
dispenser mode/cutter mode: min 25 mm
Printing
Printhead
Flat Type
Labels
Adhesive labels, continuous labels
paper, cardboard, textile, synthetics
Labels
Material weight
max 220 g/m² (other weight on request)
Labels
Roll diameter
max 127 mm
Labels
Core diameter
25.4 mm, 38.1 mm, 76.2 mm
Labels
Winding
outside or inside
Labels
Label sensor
transmission and reflexion from below
Transfer ribbon
Ink
outside
Transfer ribbon
Roll diameter
max Ø 68 mm
Transfer ribbon
Core diameter
25.4 mm / 1"
Transfer ribbon
Length
max 300 m
Transfer ribbon
Width
max 110 mm
Dimensions
Width x height x depth
226 x 171 x 285 mm
Dimensions
Weight
3 kg
Electronics
Processor
32 Bit RISC
Electronics
RAM
2 MB
Electronics
Battery cache
for real-time clock (data storage when shutdown)
Electronics
Warning signal
acoustic signal when error
Interfaces
Serial
RS-232C (up to 57600 baud)
Interfaces
Parallel
Centronics
Interfaces
USB
1.1
Interfaces
Ethernet
10/100 Base T (option)
Operation data
Power supply
110 … 230 V AC / 50 … 60 Hz
Operation data
Power consumption
max 70 VA
Operation data
Operating temperature
5 … 35 °C
Operation data
Relative humidity
max 80 % (non-condensing)
Monitoring
Stop printing if
end of ribbon, end of labels, printhead open
Monitoring
Status report
extensive status print with information about settings, e.g. print lenght counter, runtime counter, photocell, interface parameters
printout of all internal fonts and all supported bar codes
Fonts
Font types
6 bitmap fonts
6 proportional fonts
other fonts on request
Fonts
Character sets
Windows 1250 up to 1257, 437, 850, 852, 857
all West and East European, Latin, Cyrillic, Greek and Arabic characters are supported
other character sets on request
Fonts
Bitmap fonts
size in width and height 0.8 … 5.6
zoom 2 … 9
orientation 0°, 90°, 180°, 270°
Fonts
Font attributes
depending on character font
bold, italic, inverse, vertical
Fonts
Font width
varible
Bar codes
1D bar codes
CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E
Bar codes
2D bar codes
Aztec Code, CODABLOCK F, DataMatrix, MAXICODE, PDF 417, QR Code
Software
Configuration
ConfigTool
Software
Process control
NiceLabel
Software
Label software
Labelstar Office | LITE
Labelstar Office
Software
Windows driver
Windows 7® 32/64 Bit
Windows 8® 32/64 Bit
Windows 8.1® 32/64 Bit
Windows 10® 32/64 Bit
Windows Server 2008® (R2) 64 Bit
Windows Server 2012® 64 Bit
Windows Server 2012® (R2) 64 Bit
Printing
Print resolution
300 dpi
Printing
Print speed
max 100 mm/s
Printing
Print width
106 mm
Printing
Passage width
118 mm
Printing
Label width
min 25 mm
Printing
Label height
standard: max 600 mm
option Ethernet/LAN: max 550 mm
Printing
Label height
standard: min 12 mm
dispenser mode/cutter mode: min 25 mm
Printing
Printhead
Flat Type
Labels
Adhesive labels, continuous labels
paper, cardboard, textile, synthetics
Labels
Material weight
max 220 g/m² (other weight on request)
Labels
Roll diameter
max 127 mm
Labels
Core diameter
25.4 mm, 38.1 mm, 76.2 mm
Labels
Winding
outside or inside
Labels
Label sensor
transmission and reflexion from below
Transfer ribbon
Ink
outside
Transfer ribbon
Roll diameter
max Ø 68 mm
Transfer ribbon
Core diameter
25.4 mm / 1"
Transfer ribbon
Length
max 300 m
Transfer ribbon
Width
max 110 mm
Dimensions
Width x height x depth
226 x 171 x 285 mm
Dimensions
Weight
3 kg
Electronics
Processor
32 Bit RISC
Electronics
RAM
2 MB
Electronics
Battery cache
for real-time clock (data storage when shutdown)
Electronics
Warning signal
acoustic signal when error
Interfaces
Serial
RS-232C (up to 57600 baud)
Interfaces
Parallel
Centronics
Interfaces
USB
1.1
Interfaces
Ethernet
10/100 Base T (option)
Operation data
Power supply
110 … 230 V AC / 50 … 60 Hz
Operation data
Power consumption
max 70 VA
Operation data
Operating temperature
5 … 35 °C
Operation data
Relative humidity
max 80 % (non-condensing)
Monitoring
Stop printing if
end of ribbon, end of labels, printhead open
Monitoring
Status report
extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters
printout of all internal fonts and all supported bar codes
Fonts
Font types
6 bitmap fonts
6 proportional fonts
other fonts on request
Fonts
Character sets
Windows 1250 up to 1257, 437, 850, 852, 857
all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported
other character sets on request
Fonts
Bitmap fonts
size in width and heigth 0.8 … 5.6
zoom 2 … 9
orientation 0°, 90°, 180°, 270°
Fonts
Font attributes
depending on character font
bold, italic, inverse, vertical
Fonts
Font width
variable
Bar codes
1D bar codes
CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E
Bar codes
2D bar codes
Aztec Code, CODABLOCK F, DataMatrix, MAXICODE, PDF 417, QR Code
Software
Configuration
ConfigTool
Software
Process control
NiceLabel
Software
Label software
Labelstar Office | LITE
Labelstar Office
Software
Windows driver
Windows 7® 32/64 Bit
Windows 8® 32/64 Bit
Windows 8.1® 32/64 Bit
Windows 10® 32/64 Bit
Windows Server 2008® (R2) 64 Bit
Windows Server 2012® 64 Bit
Windows Server 2012® (R2) 64 Bit
Subject to alterations
3088

Cutter unit "Guillotine"

Cutter units
9018865

The guillotine cutter permits cutting of labels up to 170 g/m².

Single cut, interval cut and final cut can be selected.

3089

Cutter unit "Guillotine" with antistatic brush

Cutter units
9018867

The guillotine cutter with antistatic brush permits cutting of labels up to 170 g/m².

Single cut, interval cut and final cut can be selected.

3087

Cutter unit "Rotation"

Cutter units
9018860

The rotary cutter permits cutting of labels up to 200 g/m².

Single cut, interval cut and final cut can be selected.

3090

Dispenser unit with photocell

Dispenser units
9018850

The photocell recognizes the label in the dispensing position and interrupts the print order. After removing the label by hand the next label is printed immediately.

3093

Ethernet interface 10/100 + RTC

Ethernet interface
9018782

10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP

3091

External label unwinder

External label unwinder
9218001

For unwinding large label rolls

Max external diameter of label roll: 250 mm

Label winding: outside/inside

3092

Label rewinder PR 12

Label rewinder
9252120

PR 12 for rewinding the labels after printing

Max external diameter of label roll 210 mm

Label winding: outside/inside

Core diameter: 40 mm (optional 75 mm)

The rewinder has its own power supply.

3094

RTC (Real Time Clock)

RTC (Real Time Clock)
9018784

Real time clock to continue the time even when switching off the printer.

CARL VALENTIN GMBH ·
Neckarstraße 78 - 86 u. 94 ·
78056 Villingen-Schwenningen

Tel. +49 7720 9712-0 ·
Distribution centre +49 7720 9712-20 ·
Fax +49 7720 9712-9901 ·
info@domain1.tld