Our Products

Compa II

  • Large label rolls up to a diameter of 200 mm
  • Print speed up to 200 mm/s
  • Simplest operating and maintenance ability
  • Standard LAN, USB, serial and parallel interfaces
  • Optional WLAN interface (Warning! Cannot be retrofitted: It is to be indicated for new orders.)
applicator
thermal printhead
touch panel
wlan
configtool
Ermöglicht Konfigurationen mit professionellem Tool "configTool"
labelstar
nicelabel

Modular structure for high versatility

The optimal matching of transfer ribbon, label and pressure power enable the Compa II to print onto type plates, adhesive labels, paper, cardboard, textile and plastic. Fast and easily suitable labels with an abrasion, weather and chemical resistant printout can be obtained. A lifelong identification of your product and traceability with the aid of serial numbers is guaranteed. The Requirements of a reliable labelling e.g. for the automobile industry are guaranteed.


 


The ultimate ambition with the development was the simple and comfortable handling as well as high reliability - also in harsh environments. Housing and print mechanics are perfectly coordinated and manufactured from high quality materials. Each specific customer requirement is realised with the extensive periphery and software.


Additional


Youtube-Playlist "Compa II"

Printing
Print resolution
203 dpi
Printing
Print speed
max 200 mm/s
Printing
Print width
104 mm
Printing
Passage width
116 mm
Printing
Label width
min 12 mm
Printing
Label height
max 6000 mm
Printing
Label height
standard: min 5 mm
dispenser mode/cutter mode: min 25 mm
Printing
Printhead
Flat Type for thermal direct
Labels
Adhesive labels, continuous labels
paper, cardboard, textile, synthetics
Labels
Material weight
max 220 g/m² (other weight on request)
Labels
Roll diameter
internal unwinder: max 200 mm
internal rewinder: max 145 mm (option)
Labels
Core diameter
40 mm
75 mm (option)
Labels
Winding
outside or inside
Labels
Label sensor
transmission and reflexion from below
Dimensions
Width x height x depth
242 x 274 x 446 mm
Dimensions
Weight
10 kg
Electronics
Processor
High Speed 32 Bit
Electronics
RAM
16 MB
Electronics
Slot
for Compact Flash Card type I
Electronics
Battery cache
for real-time clock (data storage when shutdown)
Electronics
Warning signal
acoustic signal when error
Interfaces
Serial
RS-232C (up to 115200 baud)
Interfaces
Parallel
SPP
Interfaces
USB
2.0 High Speed Slave
Interfaces
Ethernet
10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP
Interfaces
2 x USB Master
connection for external USB keyboard and memory stick
Interfaces
WLAN
Module 802.11 b/g/n WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, EAP (option)
Operation data
Power supply
110 … 230 V AC / 50 … 60 Hz
Operation data
Power consumption
275 VA
Operation data
Nominal current
2.5 A
Operation data
Operating temperature
5 … 35 °C
Operation data
Relative humidity
max 80 % (non-condensing)
Operation panel
Keys
test print, function menu, quantity, CF card, label feed, enter, 4 x cursor
Operation panel
LCD display
graphic display 132 x 64 pixel
Settings
Default Settings
date, time, shift times
10 languages settings (other languages on request)
device parameters, interfaces, password protection
Monitoring
Stop printing if
end of ribbon, end of labels, printhead open
Monitoring
Status report
extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters, network parameters
printout of all internal fonts and all supported bar codes
Fonts
Font types
6 bitmap fonts
8 vector fonts/TrueType fonts
6 proportional fonts
other fonts on request
Fonts
Character sets
Windows 1250 up to 1257, 437, 850, 852, 857, UTF-8
all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported
other character sets on request
Fonts
Bitmap fonts
size in width and height 0.8 … 5.6
zoom 2 … 9
orientation 0°, 90°, 180°, 270°
Fonts
Vector fonts/<br/>TrueType fonts
size in width and height 1 … 99 mm
variable zoom
orientation 0°, 90°, 180°, 270°
Fonts
Font attributes
depending on character font
bold, italic, inverse, vertical
Fonts
Font width
variable
Bar codes
1D bar codes
CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E
Bar codes
2D bar codes
Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417, QR Code
Bar codes
Composite bar codes
GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated
Bar codes
variable in height, module width and ratio
orientation 0°, 90°, 180°, 270°
optionally with check digit and human readable line
Software
Configuration
ConfigTool
Software
Process control
NiceLabel
Software
Label software
Labelstar Office | LITE
Labelstar Office
Software
Windows driver
Windows 7® 32/64 Bit
Windows 8® 32/64 Bit
Windows 8.1® 32/64 Bit
Windows 10® 32/64 Bit
Windows Server 2008® (R2) 64 Bit
Windows Server 2012® 64 Bit
Windows Server 2012® (R2) 64 Bit
Printing
Print resolution
203 dpi
Printing
Print speed
max 200 mm/s
Printing
Print width
104 mm
Printing
Passage width
116 mm
Printing
Label width
min 12 mm
Printing
Label height
max 6000 mm
Printing
Label height
standard: min 5 mm
dispenser mode/cutter mode: min 25 mm
Printing
Printhead
Flat Type for thermal transfer
Labels
Adhesive labels, continuous labels
paper, cardboard, textile, synthetics
Labels
Material weight
max 220 g/m² (other weight on request)
Labels
Roll diameter
internal unwinder: max 200 mm
internal rewinder: max 145 mm (option)
Labels
Core diameter
40 mm
75 mm (option)
Labels
Winding
outside or inside
Labels
Label sensor
transmission and reflexion from below
Transfer ribbon
Ink
outside or inside
Transfer ribbon
Roll diameter
max Ø 80 mm
Transfer ribbon
Core diameter
25.4 mm / 1"
Transfer ribbon
Length
max 300 m
Transfer ribbon
Width
max 110 mm
Dimensions
Width x height x depth
242 x 274 x 446 mm
Dimensions
Weight
10 kg
Electronics
Processor
High Speed 32 Bit
Electronics
RAM
16 MB
Electronics
Slot
for Compact Flash Card type I
Electronics
Battery cache
for real-time clock (data storage when shutdown)
Electronics
Warning signal
acoustic signal when error
Interfaces
Serial
RS-232C (up to 115200 baud)
Interfaces
Parallel
SPP
Interfaces
USB
2.0 High Speed Slave
Interfaces
Ethernet
10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP
Interfaces
2 x USB Master
connection for external USB keyboard and memory stick
Interfaces
WLAN
Module 802.11 b/g/n WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, EAP (option)
Operation data
Power supply
110 … 230 V AC / 50 … 60 Hz
Operation data
Power consumption
275 VA
Operation data
Nominal current
2.5 A
Operation data
Operating temperature
5 … 35 °C
Operation data
Relative humidity
max 80 % (non-condensing)
Operation panel
Keys
test print, function menu, quantity, CF card, label feed, enter, 4 x cursor
Operation panel
LCD display
graphic display 132 x 64 pixel
Settings
Default Settings
date, time, shift times
10 languages settings (other languages on request)
device parameters, interfaces, password protection
Monitoring
Stop printing if
end of ribbon, end of labels, printhead open
Monitoring
Status report
extensive status print information about settings, e.g. print length counter, runtime counter, photocell, interface parameters, network parameters
printout of all internal fonts and all supported bar codes
Fonts
Font types
6 bitmap fonts
8 vector fonts/TrueType fonts
6 proportional fonts
other fonts on request
Fonts
Character sets
Windows 1250 up to 1257, 437, 850, 852, 857, UTF-8
all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported
other character sets on request
Fonts
Bitmap fonts
size in width and height 0.8 … 5.6
zoom 2 … 9
orientation 0°, 90°, 180°, 270°
Fonts
Vector fonts/<br/>TrueType fonts
size in width and height 1 … 99 mm
variable zoom
orientation 0°, 90°, 180°, 270°
Fonts
Font attributes
depending on character font
bold, italic, inverse, vertical
Fonts
Font width
variable
Bar codes
1D bar codes
CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E
Bar codes
2D bar codes
Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417, QR Code
Bar codes
Composite bar codes
GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated
Bar codes
variable in height, module width and ratio
orientation 0°, 90°, 180°, 270°
optionally with check digit and human readable line
Software
Configuration
ConfigTool
Software
Process control
NiceLabel
Software
Label software
Labelstar Office | LITE
Labelstar Office
Software
Windows driver
Windows 7® 32/64 Bit
Windows 8® 32/64 Bit
Windows 8.1® 32/64 Bit
Windows 10® 32/64 Bit
Windows Server 2008® (R2) 64 Bit
Windows Server 2012® 64 Bit
Windows Server 2012® (R2) 64 Bit
Printing
Print resolution
300 dpi
Printing
Print speed
max 200 mm/s
Printing
Print width
105.7 mm
Printing
Passage width
116 mm
Printing
Label width
min 12 mm
Printing
Label height
max 3000 mm
Printing
Label height
standard: min 5 mm
dispenser mode/cutter mode: min 25 mm
Printing
Printhead
Flat Type for thermal transfer
Labels
Adhesive labels, continuous labels
paper, cardboard, textile, synthetics
Labels
Material weight
max 220 g/m² (other weight on request)
Labels
Roll diameter
internal unwinder: max 200 mm
internal rewinder: max 145 mm (option)
Labels
Core diameter
40 mm
75 mm (option)
Labels
Winding
outside or inside
Labels
Label sensor
transmission and reflexion from below
Transfer ribbon
Ink
outside or inside
Transfer ribbon
Roll diameter
max Ø 80 mm
Transfer ribbon
Core diameter
25.4 mm / 1"
Transfer ribbon
Length
max 300 m
Transfer ribbon
Width
max 110 mm
Dimensions
Width x height x depth
242 x 274 x 446 mm
Dimensions
Weight
10 kg
Electronics
Processor
High Speed 32 Bit
Electronics
RAM
16 MB
Electronics
Slot
for Compact Flash Card type I
Electronics
Battery cache
for real-time clock (data storage when shutdown)
Electronics
Warning signal
acoustic signal when error
Interfaces
Serial
RS-232C (up to 115200 baud)
Interfaces
Parallel
SPP
Interfaces
USB
2.0 High Speed Slave
Interfaces
Ethernet
10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP
Interfaces
2 x USB Master
connection for an external USB keyboard and memory stick
Interfaces
WLAN
Module 802.11 b/g/n WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, EAP (option)
Operation data
Power supply
110 … 230 V / 50 … 60 Hz
Operation data
Power consumption
275 VA
Operation data
Nominal current
2.5 A
Operation data
Operating temperature
5 … 35 °C
Operation data
Relative humidity
max 80 % (non-condensing)
Operation panel
Keys
test print, function menu, quantity, CF card, label feed, enter, 4 x cursor
Operation panel
LCD display
graphic display 132 x 64 pixel
Settings
Default Settings
date, time, shift times
10 languages settings (other languages on request)
device parameters, interfaces, password protection
Monitoring
Stop printing if
end of ribbon, end of labels, printhead open
Monitoring
Status report
extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters, network parameters
printout of all internal fonts and all supported bar codes
Fonts
Font types
6 bitmap fonts
8 vector fonts/TrueType fonts
6 proportional fonts
other fonts on request
Fonts
Character sets
Windows 1250 up to 1257, 437, 850, 852, 857, UTF-8
all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported
other character sets on request
Fonts
Bitmap fonts
size in width and height 0.8 … 5.6
zoom 2 … 9
orientation 0°, 90°, 180°, 270°
Fonts
Vector fonts/<br/>TrueType fonts
size in width and height 1 … 99 mm
variable zoom
orientation 0°, 90°, 180°, 270°
Fonts
Font attributes
depending on character font
bold, italic, inverse, vertical
Fonts
Font width
variable
Bar codes
1D bar codes
CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E
Bar codes
2D bar codes
Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatix, MAXICODE, PDF 417, QR Code
Bar codes
Composite bar codes
GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated
Bar codes
variable in height, module width and ratio
orientation 0°, 90°, 180°, 270°
optionally with check digit and human readable line
Software
Configuration
ConfigTool
Software
Process control
NiceLabel
Software
Label software
Labelstar Office | LITE
Labelstar Office
Software
Windows driver
Windows 7® 32/64 Bit
Windows 8® 32/64 Bit
Windows 8.1® 32/64 Bit
Windows 10® 32/64 Bit
Windows Server 2008® (R2) 64 Bit
Windows Server 2012® 64 Bit
Windows Server 2012® (R2) 64 Bit
Printing
Print resolution
600 dpi
Printing
Print speed
max 150 mm/s
Printing
Print width
105.6 mm
Printing
Passage width
116 mm
Printing
Label width
min 12 mm
Printing
Label height
max 750 mm
Printing
Label height
standard: min 5 mm
dispenser mode/cutter mode: min 25 mm
Printing
Printhead
Flat Type for thermal transfer
Labels
Adhesive labels, continuous labels
paper, cardboard, textile, synthetics
Labels
Material weight
max 220 g/m² (other weight on request)
Labels
Roll diameter
internal unwinder: max 200 mm
internal rewinder: max 145 mm (option)
Labels
Core diameter
40 mm
75 mm (option)
Labels
Winding
outside or inside
Labels
Label sensor
transmission and reflexion from below
Transfer ribbon
Ink
outside or inside
Transfer ribbon
Roll diameter
max Ø 80 mm
Transfer ribbon
Core diameter
25.4 mm / 1"
Transfer ribbon
Length
max 300 m
Transfer ribbon
Width
max 110 mm
Dimensions
Width x height x depth
242 x 274 x 446 mm
Dimensions
Weight
10 kg
Electronics
Processor
High Speed 32 Bit
Electronics
RAM
16 MB
Electronics
Slot
for Compact Flash Card type I
Electronics
Battery cache
for real-time clock (data storage when shutdown)
Electronics
Warning signal
acoustic signal when error
Interfaces
Serial
RS-232C (up to 115200 baud)
Interfaces
Parallel
SPP
Interfaces
USB
2.0 High Speed Slave
Interfaces
Ethernet
10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP
Interfaces
2 x USB Master
connection for external USB keyboard and memory stick
Interfaces
WLAN
Module 802.11 b/g/n WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, EAP (option)
Operation data
Power supply
110 … 230 V AC / 50 … 60 Hz
Operation data
Power consumption
275 VA
Operation data
Nominal current
2.5 A
Operation data
Operating temperature
5 … 35 °C
Operation data
Relative humidity
max 80 % (non-condensing)
Operation panel
Keys
test print, function menu, quantity, CF card, label feed, enter, 4 x cursor
Operation panel
LCD display
graphic display 132 x 64 pixel
Settings
Default Settings
date, time, shift times
10 languages settings (other languages on request)
device parameters, interfaces, password protection
Monitoring
Stop printing if
end of ribbon, end of labels, printhead open
Monitoring
Status report
extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters, network parameters
printout of all internal fonts and all supported bar codes
Fonts
Font types
6 bitmap fonts
8 vector fonts/TrueType fonts
6 proportional fonts
other fonts on request
Fonts
Character sets
Windows 1250 up to 1257, 437, 850, 852, 857, UTF-8
all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported
other character sets on request
Fonts
Bitmap fonts
size in width and height 0.8 … 5.6
zoom 2 … 9
orientation 0°, 90°, 180°, 270°
Fonts
Vector fonts/<br/>TrueType fonts
size in width and height 1 … 99 mm
variable zoom
orientation 0°, 90°, 180°, 270°
Fonts
Font attributes
depending on character font
bold, italic, inverse, vertical
Fonts
Font width
variable
Bar codes
1D bar codes
CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E
Bar codes
2D bar codes
Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatix, MAXICODE, PDF 417, QR Code
Bar codes
Composite bar codes
GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated
Bar codes
variable in height, module width and ratio
orientation 0°, 90°, 180°, 270°
optionally with check digit and human readable line
Software
Configuration
ConfigTool
Software
Process control
NiceLabel
Software
Label software
Labelstar Office | LITE
Labelstar Office
Software
Windows driver
Windows 7® 32/64 Bit
Windows 8® 32/64 Bit
Windows 8.1® 32/64 Bit
Windows 10® 32/64 Bit
Windows Server 2008® (R2) 64 Bit
Windows Server 2012® 64 Bit
Windows Server 2012® (R2) 64 Bit
Printing
Print resolution
300 dpi
Printing
Print speed
max 200 mm/s
Printing
Print width
108.4 mm
Printing
Passage width
116 mm
Printing
Label width
min 12 mm
Printing
Label height
max 3000 mm
Printing
Label height
standard: min 5 mm
dispenser mode/cutter mode: min 25 mm
Printing
Printhead
Flat Type for thermal direct
Labels
Adhesive labels, continuous labels
paper, cardboard, textile, synthetics
Labels
Material weight
max 220 g/m² (other weight on demand)
Labels
Roll diameter
internal unwinder: max 200 mm
internal rewinder: max 145 mm (option)
Labels
Core diameter
40 mm
75 mm (option)
Labels
Winding
outside or inside
Labels
Label sensor
transmission and reflexion from below
Dimensions
Width x height x depth
242 x 274 x 446 mm
Dimensions
Weight
10 kg
Electronics
Processor
High Speed 32 Bit
Electronics
RAM
16 MB
Electronics
Slot
for Compact Flash Card type I
Electronics
Battery cache
for real-time clock (data storage when shutdown)
Electronics
Warning signal
acoustic signal when error
Interfaces
Serial
RS-232C (up to 115200 baud)
Interfaces
Parallel
SPP
Interfaces
USB
2.0 High Speed Slave
Interfaces
Ethernet
10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP
Interfaces
2 x USB Master
connection for external USB keyboard and memory stick
Interfaces
WLAN
Module 802.11 b/g/n WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, EAP (option)
Operation data
Power supply
110 … 230 V AC / 50 … 60 Hz
Operation data
Power consumption
275 VA
Operation data
Nominal current
2.5 A
Operation data
Operating temperature
5 … 35 °C
Operation data
Relative humidity
max 80 % (non-condensing)
Operation panel
Keys
test print, function menu, quantity, CF card, label feed, enter, 4 x cursor
Operation panel
LCD display
graphic display 132 x 64 pixel
Settings
Default Settings
date, time, shift times
10 languages settings (other languages on request)
device parameters, interfaces, password protection
Monitoring
Stop printing if
end of ribbon, end of labels, printhead open
Monitoring
Status report
extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters, network parameters
printout of all internal fonts and all supported bar codes
Fonts
Font types
6 bitmap fonts
8 vector fonts/TrueType fonts
6 proportional fonts
other fonts on request
Fonts
Character sets
Windows 1250 up to 1257, 437, 850, 852, 857, UTF-8
all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported
other character sets on request
Fonts
Bitmap fonts
size in width and height 0.8 … 5.6
zoom 2 … 9
orientation 0°, 90°, 180°, 270°
Fonts
Vector fonts/<br/>TrueType fonts
size in width and height 1 … 99 mm
variable zoom
orientation 0°, 90°, 180°, 270°
Fonts
Font attributes
depending on character font
bold, italic, inverse, vertical
Fonts
Font width
variable
Bar codes
1D bar codes
CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E
Bar codes
2D bar codes
Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417, QR Code
Bar codes
Composite bar codes
GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated
Bar codes
variable in height, module width and ratio
orientation 0°, 90°, 180°, 270°
optionally with check digit and human readable line
Software
Configuration
ConfigTool
Software
Process control
NiceLabel
Software
Label software
Labelstar Office | LITE
Labelstar Office
Software
Windows driver
Windows 7® 32/64 Bit
Windows 8® 32/64 Bit
Windows 8.1® 32/64 Bit
Windows 10® 32/64 Bit
Windows Server 2008® (R2) 64 Bit
Windows Server 2012® 64 Bit
Windows Server 2012® (R2) 64 Bit
Printing
Print resolution
300 dpi
Printing
Print speed
max 150 mm/s
Printing
Print width
162.6 mm
Printing
Passage width
176 mm
Printing
Label width
min 50 mm
Printing
Label height
max 2000 mm
Printing
Label height
standard: min 6 mm
dispenser mode/cutter mode: min 25 mm
Printing
Printhead
Flat Type for thermal transfer
Labels
Adhesive labels, continuous labels
paper, cardboard, textile, synthetics
Labels
Material weight
max 220 g/m² (other weight on request)
Labels
Roll diameter
internal unwinder: max 200 mm
internal rewinder: max 145 mm (option)
Labels
Core diameter
40 mm
75 mm (option)
Labels
Winding
outside or inside
Labels
Label sensor
transmission and reflexion from below
Transfer ribbon
Ink
outside or inside
Transfer ribbon
Roll diameter
max Ø 80 mm
Transfer ribbon
Core diameter
25.4 mm / 1"
Transfer ribbon
Length
max 300 m
Transfer ribbon
Width
max 170 mm
Dimensions
Width x height x depth
302 x 274 x 446 mm
Dimensions
Weight
14 kg
Electronics
Processor
High Speed 32 Bit
Electronics
RAM
16 MB
Electronics
Slot
for Compact Flash Card type I
Electronics
Battery cache
for real-time clock (data storage when shutdown)
Electronics
Warning signal
acoustic signal when error
Interfaces
Serial
RS-232C (up to 115200 baud)
Interfaces
Parallel
SPP
Interfaces
USB
2.0 High Speed Slave
Interfaces
Ethernet
10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP
Interfaces
2 x USB Master
connection for external USB keyboard and memory stick
Interfaces
WLAN
Module 802.11 b/g/n WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, EAP (option)
Operation data
Power supply
110 … 230 V AC / 50 … 60 Hz
Operation data
Power consumption
275 VA
Operation data
Nominal current
2.5 A
Operation data
Operating temperature
5 … 35 °C
Operation data
Relative humidity
max 80 % (non-condensing)
Operation panel
Keys
test print, function menu, quantity, CF card, label feed, enter, 4 x cursor
Operation panel
LCD display
graphic display 132 x 64 pixel
Settings
Default Settings
date, time, shift times
10 languages settings (other languages on request)
device parameters, interfaces, password protection
Monitoring
Stop printing if
end of ribbon, end of labels, printhead open
Monitoring
Status report
extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters, network parameters
printout of all internal fonts and all supported bar codes
Fonts
Font types
6 bitmap fonts
8 vector fonts/TrueType fonts
6 proportional fonts
other fonts on request
Fonts
Character sets
Windows 1250 up to 1257, 437, 850, 852, 857, UTF-8
all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported
other character sets on request
Fonts
Bitmap fonts
size in width and height 0.8 … 5.6
zoom 2 … 9
orientation 0°, 90°, 180°, 270°
Fonts
Vector fonts/<br/>TrueType fonts
size in width and height 1 … 99 mm
variable zoom
orientation 0°, 90°, 180°, 270°
Fonts
Font attributes
depending on character font
bold, italic, inverse, vertical
Fonts
Font width
variable
Bar codes
1D bar codes
CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E
Bar codes
2D bar codes
Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417, QR Code
Bar codes
Composite bar codes
GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated
Bar codes
variable in height, module width and ratio
orientation 0°, 90°, 180°, 270°
optionally with check digit and human readable line
Software
Configuration
ConfigTool
Software
Process control
NiceLabel
Software
Label software
Labelstar Office | LITE
Labelstar Office
Software
Windows driver
Windows 7® 32/64 Bit
Windows 8® 32/64 Bit
Windows 8.1® 32/64 Bit
Windows 10® 32/64 Bit
Windows Server 2008® (R2) 64 Bit
Windows Server 2012® 64 Bit
Windows Server 2012® (R2) 64 Bit
Printing
Print resolution
300 dpi
Printing
Print speed
max 150 mm/s
Printing
Print width
162.6 mm
Printing
Passage width
176 mm
Printing
Label width
min 50 mm
Printing
Label height
max 2000 mm
Printing
Label height
standard: min 6 mm
dispenser mode/cutter mode: min 25 mm
Printing
Printhead
Flat Type for thermal direct
Labels
Adhesive labels, continuous labels
paper, cardboard, textile, synthetics
Labels
Material weight
max 220 g/m² (other weight on request)
Labels
Roll diameter
internal unwinder: max 200 mm
internal rewinder: max 145 mm (option)
Labels
Core diameter
40 mm
75 mm (option)
Labels
Winding
outside or inside
Labels
Label sensor
transmission and reflexion from below
Dimensions
Width x height x depth
302 x 274 x 446 mm
Dimensions
Weight
14 kg
Electronics
Processor
High Speed 32 Bit
Electronics
RAM
16 MB
Electronics
Slot
for Compact Flash Card type I
Electronics
Battery cache
for real-time clock (data storage when shutdown)
Electronics
Warning signal
acoustic signal when error
Interfaces
Serial
RS-232C (up to 115200 baud)
Interfaces
Parallel
SPP
Interfaces
USB
2.0 High Speed Slave
Interfaces
Ethernet
10/100 Base T, LPD, RawIP-Printing, DHCP, HTTP, FTP
Interfaces
2 x USB Master
connection for USB keyboard and memory stick
Interfaces
WLAN
Module 802.11 b/g/n WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, EAP (option)
Operation data
Power supply
110 … 230 V AC / 50 … 60 Hz
Operation data
Power consumption
275 VA
Operation data
Nominal current
2.5 A
Operation data
Operating temperature
5 … 35 °C
Operation data
Relative humidity
max 80 % (non-condensing)
Operation panel
Keys
test print, function menu, quantity, CF card, label feed, enter, 4 x cursor
Operation panel
LCD display
graphic display 132 x 64 pixel
Settings
Default Settings
date, time, shift times
10 languages settings (other languages on request)
device parameters, interfaces, password protection
Monitoring
Stop printing if
end of ribbon, end of labels, printhead open
Monitoring
Status report
extensive status print with information about settings, e.g. print length counter, runtime counter, photocell, interface parameters, network parameters
printout of all internal fonts and all supported bar codes
Fonts
Font types
6 bitmap fonts
8 vector fonts/TrueType fonts
6 proportional fonts
other fonts on request
Fonts
Character sets
Windows 1250 up to 1257, 437, 850, 852, 857, UTF-8
all West and East European, Latin, Cyrillic, Greek and Arabic (option) characters are supported
other character sets on request
Fonts
Bitmap fonts
size in width and height 0.8 … 5.6
zoom 2 … 9
orientation 0°, 90°, 180°, 270°
Fonts
Vector fonts/<br/>TrueType fonts
size in width and height 1 … 99 mm
variable zoom
orientation 0°, 90°, 180°, 270°
Fonts
Font attributes
depending on character font
bold, italic, inverse, vertical
Fonts
Font width
variable
Bar codes
1D bar codes
CODABAR, Code 128, Code 2/5 interleaved, Code 39, Code 39 extended, Code 93, EAN 13, EAN 8, EAN ADD ON, GS1-128, Identcode, ITF 14, Leitcode, Pharmacode, PZN Code, UPC-A, UPC-E
Bar codes
2D bar codes
Aztec Code, CODABLOCK F, DataMatrix, GS1 DataMatrix, MAXICODE, PDF 417, QR Code
Bar codes
Composite bar codes
GS1 DataBar Expanded, GS1 DataBar Limited, GS1 DataBar Omnidirectional, GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional, GS1 DataBar Truncated
Bar codes
variable in height, module width and ratio
orientation 0°, 90°, 180°, 270°
optionally with check digit and human readable line
Software
Configuration
ConfigTool
Software
Process control
NiceLabel
Software
Label software
Labelstar Office | LITE
Labelstar Office
Software
Windows driver
Windows 7® 32/64 Bit
Windows 8® 32/64 Bit
Windows 8.1® 32/64 Bit
Windows 10® 32/64 Bit
Windows Server 2008® (R2) 64 Bit
Windows Server 2012® 64 Bit
Windows Server 2012® (R2) 64 Bit
Subject to alterations
1524

Additional toroidal 75 mm cpl for unwinder

Additional toroidals
7215060

For the use of 75 mm cardboard core instead of 40 mm (standard).

1533

Pneumatic applicator, max. cylinder stroke 300 mm

Applicators
9252500B

Applicator unit to stamp on, blow on and roll on of labels.

1534

Pneumatic applicator, max. cylinder stroke 400 mm

Applicators
9252502B

Applicator unit to stamp on, blow on and roll on of labels.

1523

Connection set for rewinder and unwinder

Connection sets
9266090

For exact adjustment of external rewinding units PR 12, PR 17, PR 45 II and the external unwinding unit PA 50A to the printer.

1502

Cutter unit "Rotation" for Compa II 10X

Cutter units
9052860

The rotary cutter permits cutting of labels up to 200 g/m².

Single cut, interval cut and final cut can be selected.

1505

Cutter unit "Rotation" for Compa II 162

Cutter units
9052960

The rotary cutter permits cutting of labels up to 200 g/m².

Single cut, interval cut and final cut can be selected.

1507

Cutter unit with antistatic brush Compa II 162

Cutter units
9052966

The rotary cutter with antistatic brush permits cutting of labels up to 200 g/m².

Single cut, interval cut and final cut can be selected.

1504

Cutter unit with antistatic brush for Compa II 10X

Cutter units
9052866

The rotary cutter with antistatic brush permits cutting of labels up to 200 g/m².

Single cut, interval cut and final cut can be selected.

1510

Dispenser inputs/outputs

Dispenser inputs/outputs
9052785B

With a maximum of 16 control inputs and outputs, different functions of the printer can be released and operating conditions be shown.

1509

Dispensing edge extended with photocell for Compa II 10X

Dispensing edges
9052850B

Only in connection with a dispenser unit.

If labels are difficult to remove from the liner, then this extended dispensing edge is used.

1531

Foot switch with protection cover

Foot switches
9052795B

With the foot switch connected to the dispenser inputs/outputs, the print start can be released.

1503

Label bowl for Compa II 10X

Label bowls
9052865

Receptacle for labels that are cut after printing.

1506

Label bowl for Compa II 162

Label bowls
9052962

Receptacle for labels that are cut after printing.

1508

Photocell dispenser unit

Photocells
9052750B

The dispensing unit is controlled by a manual switch, foot switch or an external control signal.

1532

Product sensor Reflexion

Product sensors
9052796B

With the product sensor connected to the dispenser inputs/outputs, the print start can be released.

1516

Rewinder plate for Compa II 10X

Rewinder plates
9052872

Only for printers with dispenser

For rewinding labels internally despite the installed dispenser

1517

Rewinder plate for Compa II 162

Rewinder plates
9052972

Only for printers with dispenser

For rewinding labels internally despite the installed dispenser

1512

Internal rewinder for Compa II 10X thermal transfer version

Rewinder units
9052870A

For rewinding small label rolls after printing inside the printer.

In dispensing mode, for rewinding the liner.

Max external diameter of label roll: 145 mm

Label winding: outside

1513

Internal rewinder for Compa II 10X thermal version

Rewinder units
9052875A

For rewinding small label rolls after printing inside the printer.

In dispensing mode, for rewinding the liner.

Max external diameter of label roll: 145 mm

Label winding: outside

1514

Internal rewinder for Compa II 162 thermal transfer version

Rewinder units
9052970A

For rewinding small label rolls after printing inside the printer.

In dispensing mode, for rewinding the liner.

Max external diameter of label roll: 145 mm

Label winding: outside

1515

Internal rewinder for Compa II 162 thermal version

Rewinder units
9052975A

For rewinding small label rolls after printing inside the printer.

In dispensing mode, for rewinding the liner.

Max external diameter of label roll: 145 mm

Label winding: outside

1518

Label rewinder PR 10

Rewinder units
9252100

PR 10 for rewinding the labels after printing

Max external diameter of label roll: 210 mm

Max label width: 120 mm (for Compa II 10X)

Label winding: outside/inside

Core diameter: 40 mm on cardboard core or winding axis

76 mm on cardboard core using adapter

1519

Label rewinder PR 12

Rewinder units
9252120

PR 12 for rewinding the labels after printing

Max outside diameter of label roll: 300 mm

Max label width: 120 mm (for Compa II 10X)

Label winding: outside/inside

Core diameter: 40 mm on cardboard core or winding axis

76 mm on cardboard core using adapter

The rewinder has its own power supply.

1520

Label rewinder PR 15

Rewinder units
9252200

PR 15 for rewinding the labels after printing

Max external diameter of label roll: 210 mm

Max label width: 180 mm (for Compa II 162)

Label winding: outside/inside

Core diameter: 40 mm on cardboard core or winding axis

76 mm on cardboard core using adapter

1521

Label rewinder PR 17

Rewinder units
9252220

PR 17 for rewinding the labels after printing

Max external diameter of label roll: 300 mm

Max label width: 180 mm (for Compa II 162)

Label winding: outside/inside

Core diameter: 40 mm on cardboard core or winding axis

76 mm on cardboard core using adapter

The rewinder has its own power supply.

1530

Signal lamp

Signal lamps
9052790B

For displaying the current printer status.

1522

Label unwinder PA 50A

Unwinder units
9266050A

PA 50A for unwinding large label rolls

Max external diameter of label roll: 300 mm

Label winding: outside/inside

Core diameter: 40 mm (optional 75 mm)

1525

WLAN

WLAN
9052780B

WLAN card 802.11b/g WEP/WPA PSK (TKIP)

(Warning! Cannot be retrofitted: It is to be indicated for new orders.)

CARL VALENTIN GMBH ·
Neckarstraße 78 - 86 u. 94 ·
78056 Villingen-Schwenningen

Tel. +49 7720 9712-0 ·
Distribution centre +49 7720 9712-20 ·
Fax +49 7720 9712-9901 ·
info@domain1.tld